Diagnosing faults on washing machine Motors and testing them
Most ACC washing machine Motors ( Sole - C.E.SET - Nidec) are either 6 pin 7 pin or 8 pin This normally means that they are have up to 4 Field Windings 2 of the wires will be going to the tachometer which controls the motor RPM speed, another 2 wires will be going to the right and left carbon brush
These motors are normally used on makes like:
Candy, Falcon, Friac, Helkama, Hoover, Howden, Philco, Rosieres, Terzismo, Xperial, Zerowatt,
AEG, Arthur Martin, Electrolux, Elektro Helios, Faure, Fors, Franke, Husqvarna, Ikea, John Lewis, Juno, Nordland, Privileg, Rex, Rosenlew, Silentic, Tricity Bendix, Zanker, Zanussi, Zoppas,
Acc motor test rig wiring for 6 min motors
always check your wiring configuration before testing the motor
Bosch washing machine is fitted to a wide range of machines listed below, Motors are either 6 pin, 7 pin, or 8 pin. This normally means that they have up to 4 Field Windings 2 of the wires will be going to the tachometer which controls the motor RPM speed, another 2 wires will be going to the right and left carbon brush One of these wires normally go through a heat sink protection unit Something like a Klixon 15AM213A This is here to protect the motor if it ever got exceedingly hot, this stops the motor Catching Fire.
These motors are normally used on makes like:
Balay, Bauknecht, Bosch, Constructa, Crolls, Daewoo, DeDietrich, Gaggenau, Hitachi, Koenic, Kuppersbusch, Laden, Lynx, Merker, Neff, Novamatic, Pitsos, Profilo, Schulthess, Siemens, Superser, Thomson, Viva, Whirlpool,
Bosch, Neff, Siemens motor test rig wiring for 6 min motors
4 Responses to “Diagnosing faults on washing machine Motors and testing them”
Hi,
I follow you from belgium great website!!!
you help me a lot in my small started company
where can i buy a tester for motor, from the vid where you testing a motor
Greetz
Tom
good morning..i could you advise what’s the possible outcome to clear a F50 fault on a Miele W5740
washer. manufactured Sep.2000 GUTERSLOH… i understand that’s a DRIVE fault .does that indicate an RPS ! needs replacing or could it also mean the PCB !
.have tried reset but to no avail or maybe didn’t do the correct sequence !
Thank you.
Hi I can’t find the video on making the test box, I’ve found the one on hot wiring the motor but I’m after the actual control box?
Hi
Dear engineer
would you please let me know how can i test Washing machine 9 plugs universal elector motor to find plugs and To diagnose the problems?
thanks on beforehand of your kind advises
B/R
One of those who are interested persons in your popular site from IRAN
Abbas- Khandan