Our fan oven element for Beko BDC643 a bulb for your cooker Hi I have a Beko BDC643 60cm wide electric cooker with ceramic hob, i need the fan oven element for my cooker also can you give me any help with fitting it Josie     Paul answers     Hi Josie     This

 Hi I need a Beko dvc61 fan oven element for my cooker also can you help with the fitting which video should I be watching May thanks for your help Vicky     Paul answers   Beko Fan Oven Elements   Hi Vicky     This is the one you need for your Beko dvc61 cooker,

Teka HT485 oven tripping the meter

Thursday, 08 January 2015 by

Hi, I have a problem with a Teka HT 485 oven. When I switch the oven or grill on the meter trips out. I have checked both elements with a electrical meter – the grill element reads 35 and the oven element 56 ohms (i think) The oven hasnt been used in a number of

    Hi Kurt have you checked the elements, when the thermostat light is on this normally means that power is going to the elements, therefore one of the elements might be open circuit. please check  our repair guides for help on this.        

  Hi Andrew there is no real way of getting at this unless you take the cooker out and then take the back plate, you will then be able to get at the wire.

Hi David have you anther number like this F6E0DX004X or F6E0DX011X yes CPF F6EODX011X then these are the elements for your cooker one is Genuine and the other is Pattern

  Hi Anthony Here are the two elements you need for your Cannon 10450G cooker Just click here to go to the product. i hope this helps you. if you need help fitting go to our repair guides

  First disconnect the cooker from the electoral supply then you have to take back panel of and it’s at the bottom remove wirier remembering where they come from (take picture) then the element slides backwards or you have to take the back and the bottom panel of then remove insulation and replace the base

Format cooker, oven element needed

Wednesday, 26 November 2014 by

  Hi john I will need the full model number of your id label, you can normally find this inside the main oven door on the body frame           Great John here is a link to the Elements available for your model Belling  616 Br  

  Hi Terry OK this sounds like the fan oven element has possibly blown you need to check it. see this Video     i will need your full model number of the id plate                 OK here are the elements Zanussi ZCE7610W   for your cooker    

TOP