Hotpoint NTM1182XBUK Tumble Dryer very noisy when spins
My tumble dryer starts running and it sounds okay but after about 20 minutes I can hear a scraping type noise which just seems to get louder and louder.
- Published in
Hotpoint SUTCD97B6PM tumble dryer. The dryer takes longer to dry clothes
- Published in
Hotpoint FTCD9726PM1 heat pump tumble dryer not getting hot
- Published in
Hotpoint TCHL870BP Tumble Dryer Blowing Cold Air Not Heating Up?
Why Is my tumble blowing cold air? dryer not heating up? I have a condenser tumble dryer and it is not heating up I have cleaned all the filters empty the water tank, but I still have not go any heat do you think it may be the heating element
- Published in
Hotpoint TVFM70BGP Tumble Dryer not heating
I have a tumble dryer that’s only 18 months old I just stopped heating completely, it all seems to be running correctly but the clothes are wet and not warm.
- Published in
Hotpoint Tumble dryer TCFS83BGG spins but does not dry
My tumble dryer runs for a few minutes but it’s not getting hot sometimes it will stop and just beep
- Published in
Hoover DYC 8913 B -80 tumble dryer Not Heating Thermal Fuse blown
Sir, Firstly, A Happy New Year and thank you for the excellent videos, which have been so helpful. A pint or two will definitely be on the way after this problem is finally resolved!
I now realise our dryer had two problems. Initially I replaced the thermal fuse mounted above the heater (left side) but it has now blown again. Sometimes the dryer failed to start with the buzzing sound which I have learnt from your video is a failed or failing condenser, so yesterday I ordered a replacement (7mf) and another thermal fuse from your eBay shop. I managed to carefully extract the defective condenser with the drum in place.
After discussions with my wife I understand that sometimes the dryer stops mid cycle, when hot, with the same buzzing sound, presumably when about to change direction. Error code, possibly E8 and/or flashing display occurred.
I have tested everything else I can reach with the exception of a temp sensor at the back in the ducting below the drum. I am reluctant to remove the drum incase I have a problem re-fitting the belt!
From the above, do you think it is possible that the replacement thermal fuses blew (after a couple of weeks) due to overheating when the drum failed to reverse and the heaters may have still been active?
Your advise will be very much appreciated
kind regards
Robert
- Published in
Hotpoint FTCD9726PM1 heat pump tumble dryer very noisy
my tumble dryer is making a weird scraping type noise and I do not know where it’s coming from please would you help me in finding the problem I have seen some of your videos but I still can’t work out what the problem is
- Published in
Hotpoint TCHL870BP condenser tumble dryer turns spins but doesn´t dry
my tumble dryer turns and runs without any problem but it is just not getting hot. there is no error code coming up, I have cleaned all the filters and made sure the ducting are all clear but there is no water going into the dispenser and I cannot feel any heat at all,
- Published in
Hotpoint TVHM80CP vented tumble dryer not heating
hi I change the belt on my tumble dryer a few months ago I just snapped again the machine was making a grinding noise could you tell me if they could be anything else wrong with the machine it seems to be heating okay
- Published in