NEW REPAIR GUIDES

FORGOT YOUR DETAILS?

AAH, WAIT, I REMEMBER NOW!

AEG Lavathern 96699 IH E71

by / Tuesday, 27 March 2018 / Published in

Dryer run a cycle and randomly it can stop with an E71 code. I run a test mode and clear the code. Start again and the code might appear 2 hours later again. Sometimes the code appears as E70 and in test mode it shows as E71. Is it the NTC, some loose wiring, or the PCB? Is E71 referring to the NTC right next to the compressor as seen in one of your videos?Thanks for your time.

Pete

Paul answers

I will try and help with this problem for AEG Lavatherm 96699 IH E71

Rather than the PCB, it is Possible that NTC1 sensor is faulty; Wiring faulty; Electronic board faulty. Machine Status/Action Forced cooling cycle. E71 is NTC 1. E72 is NTC2.

 

If you need any further assistance please feel free to contact me​. all the best Paul​.

photo  
Paul Charmbury
Appliances Engineer
youtube facebook google+ beer

Video to help you with your AEG Tumble Dryer E71 Code.

List of spare parts for AEG Lavatherm 96699 IH E71

Our How-to-repair stores

Current page 1 Total pages 0

  • Tumble Dryer Belt 1975 7 Rib 1258288107

    Category: Recycle Appliances

    £9.50

  • Tumble Dryer Door Seal Gasket 1251085021

    Category: Recycle Appliances

    £17.00

  • Tumble Dryer Capacitor 8UF 1250020334

    Category: Recycle Appliances

    £7.50
24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.

TOP