Beko OIM25503X fan oven stopped working

by / Thursday, 17 September 2020 / Published in

I have a beko OIM25503X single oven which I have had for 8 years and the oven suddenly stopped working,everytime i turn it on it keeps tripping the electrics but the grill is working fine

Terri

Paul answers

I will try and help with this problem with your Beko OIM25503X Electric Single Oven

This sounds like the element is at fault, see videos on this below. I have included videos below for you to replace the old one they will show you how to remove Beko elements and fit the new one. Also a video is on how to test Beko fan oven elements

For your future reference I’ve included some Common faults with these Beko OIM25503X Single Oven cookers to assist you in the future or anyone else reading this.

  • The oven will not turn on
    The first thing you need to check is that the oven timer is not on auto if it is turn it on to manual.
  • No Heat in Oven
    If the fan is running and the thermostat light comes on but you get no heat (or just the thermostat light on in non-fan ovens and cookers) then the probability is that the fan element or oven elements have failed.
  • Electricity trips (Rcd) when I turn the oven on or grill
    This is normally an element that has gone to earth, This is a well-known fault with electric ovens, the insulation breaks down in the elements and trips the RCD , best way is to stick a meter on each element and check that they have not got earth leaks on them. But this can also be a wiring fault.
  • The grill element doesn't work
    This would usually indicate that the grill element is faulty. Check these: Grill element, Oven changeover switch, Overheat thermostat, Main oven thermostat, if used to regulate the grill temperature.
  • The oven fan is not working or spinning correctly (slow) or is noisy
    The fan motor may need to be replaced see video on this also the cooling fan motor can cause same problems.
  • The oven overheats and burns everything
    Normally this is a simple thermostat failure which would manifest itself as this symptom.
  • The oven or cooker cuts out after it's been on for a while
    This is an overheating problem which can be caused by the fan motor or main oven thermostat or a faulty safety thermostat that will be causing the problem. It can also be caused by a failure of the cooling fan, where fitted, but usually these go noisy before failing, Safety thermostats are used to prevent the oven or cooker overheating and will shut the oven down.

Beko OIM25503X single oven exploded parts view
Beko OIM25503X single oven wiring diagram

 

 

 

If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.

YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page

 

If you need any further assistance please feel free to contact me​. all the best Paul​.

photo  
Paul Charmbury
Appliances Engineer
youtube facebook google+ beer

full list of spare parts for this model below Beko OIM25503X Electric Single Oven

Our How-to-repair stores

Current page 1 Total pages 0
24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.

TOP