Beko Oven bxim35300x Keeps tripping electrics
Keeps tripping the electrics RDC tried on 2 separate RDC circuits cable into oven has been replaced
Roxanne
I will try and help with your Beko Oven bxim35300x problem.
hi, have you checked the elements as this is a common fault. I've added videos below to help you and also an exploded diagram with full parts list at the bottom of page
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page
Common Beko Oven bxim35300x faults with links to the right repair guide
I have also added some exploded diagrams below with a full list of parts and some videos to assist you
- The oven will not turn on
The first thing you need to check is that the oven timer is not on auto if it is, turn it on to manual.
- No Heat in Oven
If the fan is running and the thermostat light comes on but you get no heat (or just the thermostat light on in non-fan ovens and cookers) then the probability is that the fan element or oven elements have failed.
- Electricity trips (Rcd) when I turn the oven on or grill
This is normally an element that has gone to earth, This is a well-known fault with electric ovens, the insulation breaks down in the elements and trips the RCD , best way is to stick a meter on each element and check that they have not got earth leaks on them. But this can also be a wiring fault.
- The grill element doesn't work
This would usually indicate that the grill element is faulty. Check these: Grill element, Oven changeover switch, Overheat thermostat, Main oven thermostat, if used to regulate the grill temperature.
- The oven fan is not working or spinning correctly (slow) or is noisy
The fan motor may need to be replaced see video on this also the cooling fan motor can cause same problems.
- The oven overheats and burns everything
Normally this is a simple thermostat failure which would manifest itself as this symptom.
- The oven or cooker cuts out after it's been on for a while
This is an overheating problem which can be caused by the fan motor or main oven thermostat or a faulty safety thermostat that will be causing the problem. It can also be caused by a failure of the cooling fan, where fitted, but usually these go noisy before failing, Safety thermostats are used to prevent the oven or cooker overheating and will shut the oven down.
Contact us with the full model number and detailed description
full list of spare parts for Beko Oven bxim35300x model below
Reference | Part Number | Description |
---|---|---|
250440484 | HANDLE DECOR LEFT_BLACK | |
10 | 250440633 | TAP KNOB. |
1005 | 258440079 | TIMER COVER PLASTIC |
1008 | 215440114 | OVEN COOLING FAN MOUNTING SHEET |
101 | 264440148 | OVEN CIRCULATION BLOWER-220V-240V |
101 | 264440102 | OVEN CIRCULATION BLOWER-220V-240V |
1027 | 215440258 | BI METAL HIT PROTECTION SHEET |
106 | 262900095 | BOTTOM HEATING ELEM_(1100+1100)W_240V_UL |
107 | 262900174 | OVEN HEATING ELEMENT-230 |
108 | 215440109 | HEATING ELEMENT HOLDER SHEET |
11 | 215440011 | REAR WALL |
1127 | 250410156 | SIGNAL LAMP gr. |
1179 | 255440126 | FRONT DOOR GAP SEAL |
118 | 260405261 | SERVICE CABLE GROUP |
12 | 215440105 | SIDE WALL |
12 | 215440104 | SIDE WALL |
131 | 455100018 | BURNER PLATE REAR PROTECTIVE GASKET |
1334 | 250440819 | CALL RIGHT COVER GLASS PLASTIC |
1335 | 250440817 | CALL LEFT COVER GLASS PLASTIC |
1349 | 210410943 | SCREW GROUP |
140 | 173100022 | HANDLE FASTENING WASHER |
15 | 218440117 | BOTTOM PLATE_60CM_BLACK |
150 | 171100043 | FURNITURE MOUNTING SCREW |
1541 | 272100001 | M 6 NUT- DIRECTION OF BOLD IS LEFT |
17 | 215440103 | CAVITY SIDE HINGE HOUSING_LEFT_ |
177 | 172100005 | M 6 NUT |
20 | 210442525 | OVEN BODY |
205 | 240440119 | WIRE SHELF FOR TRAY |
21 | 291460006 | OVEN BODY SURROUNDED GLASS WOOL |
22 | 291460011 | GLASS WOOL REAR |
23 | 215460018 | TURBO MOTOR SHEET-FAMILY-ZEUS |
243 | 210444692 | WIRE SHELFS GROUP. |
252 | 264440128 | OVEN CIRCULATION BLOWER(100cm-RIGHT) |
263 | 263100015 | EGO THERMOSTAT 551705303_280 HUAYI |
27 | 240440219 | INTERNAL WIRE FRY STOPER RAFLI_BAR_AVUST |
28 | 219440101 | BLACK ENAMELED ST TRAY(W_462xD_365xH_39) |
29 | 255460006 | FIXING TAMPON |
35 | 215460047 | TOP WALL |
368 | 218440325 | SIDE PROFILE-LEFT-BLACK |
369 | 218440319 | SIDE PROFILE-RIGHT-BLACK |
375 | 265900017 | HALOJEN OVEN LAMP |
41 | 250440395 | FRONT DOOR TOP DECOR |
44 | 218440102 | DOOR BOTTOM COVER SHEET |
45 | 210441827 | 60_60 FRONT DOOR HINGE_SHORTER TYPE_ |
460 | 250920069 | CABLE TIE-BIG_M TYPE_A20 |
47 | 210441825 | HANDLE GR_ARC713_INOX_B14 |
475 | 265100044 | SIGNAL LAMP |
479 | 290460055 | FRONT MIDDLE GLASS |
479 | 298460008 | INNER DOOR GLASS |
557 | 263410017 | BODY BIMETAL THERMOSTAT ABNORMAL CONDITI |
576 | 250440112 | CONNECTING THE SWITCH PLASTIC |
602 | 215440113 | STEEL |
618 | 210440103 | AIR CONDITION SHEET |
72 | 255440112 | FRONT DOOR STOPER PLASTIC |
727 | 250440483 | HANDLE DECOR RIGHT_BLACK |
883 | 250440102 | DOOR GR SIDE HINGE PLASTIC HOUSING_LEFT |
883 | 250440103 | DOOR GR SIDE HINGE PLASTIC HOUSING_RIGHT |
884 | 210460329 | FRONT DOOR GROUP |
885 | 234440126 | DOOR TO HANDLE CONNECTION PIN_M4_D8_SIZE |
887 | 250440108 | OVEN HANDLING PLASTIC |
888 | 250440109 | FURNITURE MOUNTING PLASTIC |
889 | 263410018 | thermal cutout 70 degrees |
9 | 210460231 | FRONT PANEL GROUP |
902 | 210440105 | THERMOSTAT BULB CLIP |
916 | 255440118 | FRONT DOOR STOPER PLASTIC_BOTTOM_Ø8 |
93 | 263100032 | MULTIFUNCTION COMMUTATOR_8 POSITIONS |
935 | 215440102 | CAVITY SIDE HINGE HOUSING RIGHT |
949 | 172440103 | WIRE SHELF FIXING NUT |
950 | 217440103 | BAR TURBO FAN BLADE |
950 | 210441936 | COOLING MOTOR PROPELLER |
96 | 267440068 | TIMER |
97 | 219460001 | FAN PROTECTION SHEET_ZEUS |
97 | 219460002 | FAN PROTECTION SHEET_ZEUS |
98 | 262900090 | CIRCULAR HEATING ELEMENT |
Hi, I bought a used Beko bxif35300x oven and cut the plug off and wired it to the previous cooker cable. It’s switched on because I can see the clock but when I try to use the oven it trips? Sometimes it lasts a few minutes before tripping, other times its immediate. Do you have any ideas? Is it something I can sort myself? Thanks