Beko Washing Machine Wtb941r2w Very noisy when spinning
The machine is less than 2 years old and out of guarantee and very noisy when spinning and grease deposits on door and seal
Colin Hughes
I will try and help with your Beko Washing Machine Wtb941r2w problem.
This sounds like the bearings are starting to fail. The grease you mention will likely be the rubber seal for the bearing failing as well and the lubricant from the bearing and shaft is entering into the drum and going all over. Almost all machines nowadays have sealed drums, including yours, meaning you can't change the bearings. Buying a complete drum tub assembly is uneconomical and not easy to replace by yourself so the best advice I have for you is to buy a new machine. We have some suggestions and recommendations here.
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page
Common Beko Washing Machine Wtb941r2w faults with links to the right repair guide
- The machine won’t fill with water
Make sure the door is properly closed, check that inlet hoses are clear and not kinked and that the water supply is connected and functioning. Water valve may be faulty See our video on water valves
- The drum doesn’t turn
There are a number of things that can cause this, including worn carbon brushes, drive belt problems, or a faulty motor or control unit PCB. On new machines with 3 phase motors or inverter motors, they get a lot of control board faults
- The machine stops mid-cycle
This generally means that the timer, thermostat, or heater had failed. The washing machine may stop due to these faults or the water rinse valve may be faulty or the machine has not emptied the water out of the drum in an allocated period of time.
- The washing machine is noisy
A rattle, while the drum is moving, could be due to something stuck in the drum, coins and bra wires are common culprits. You may be able to remove the drum paddles to get to the offending item or remove the sump hose or heater. It’s also worth checking the drain filter to make sure that’s clear. A noisy washing machine may also indicate failed or worn bearings or drum spider. Try turning the drum by hand when the machine is empty. If you hear a rumbling noise or can feel ‘play’ in the drum, it’s likely that the bearings need replacing. You can also get drum spring or shock absorber problems.
- Water not draining from the washing machine
This usually means there’s a blockage in the drainage filter, or the pump itself has failed. The first thing you’ll want to do is empty the water so you can rescue your laundry. Pull out the drain hose, pop it into a bucket and let gravity do the work. Also, check the sump hose and waste pipe if fitted to a sink unit the problem can also be the connection.
- The washing machine won’t spin
Problems with the spin cycle are relatively common washing machine faults, if your machine knows there is water still in the drum it will not allow the drum to spin it must empty in an allocated period of time. The good news is that they’re generally relatively inexpensive and simple to fix. Balance sensors will override the cycle if the clothes are unevenly distributed and could cause the machine to vibrate. This can happen if you’ve overloaded the washer, or if you’re trying to spin just a few items. Try reloading light loads or removing a few items from heavy ones. If this fails, motor carbon brushes may need to be replaced. On new machines with 3 phase motors or inverter motors, they get a lot of control board faults
- The door won’t open
This will usually be due to water not draining, or a faulty door lock. Drain manually as above. If that doesn’t fix the problem you may be able to remove the top of the machine and release the lock from the inside see videos.
- Clothes smell bad
If you always use low-temperature washes and biological detergents you could have a build-up of bacteria or even mold in the machine. Try running a hot empty wash once a week. You should also clean out the soap dispenser regularly, and leave the machine door open to air after you’ve removed the washing.
- The washing machine is damaging clothes
Tears in clothes indicate foreign bodies in the machine or damage to the drum.
10.The washing machine is constantly filling with water
the machine is siphoning or water valve is leaking
11.The machine reports a fault code or error code
Error codes can be on the display or given in certain lights flashing sequences. Washing machine fault codes are not universal but may only point you or an engineer in the right direction they are not 100% accurate they are only that for guidance. Your owner’s manual may help you identify the problem and even suggest a fix. In other cases, you’ll need an engineer to trace the fault. Don’t be tempted to ignore a fault code, even if the machine seems to be functioning normally. Some codes are ‘early warning signs’ and fixing the machine at an early stage could save you time and money in the long run. Contact us with the full model number and detailed description
-
Beko Washing Machine Door Handle & Hinge Catch: how to replace
-
Beko washing machine not starting how to replace the door lock interlock
-
Beko washing machine wmb 7, 8, 9 Series diagnostic & test mode
-
Beko washing machine not filling with water Error code E08
-
Beko washing machine self test & diagnostic mode
-
Beko WM5101W Washing Machine Test Mode & Error Codes
-
How to Replace Beko washing Machine Door Seal
Match your part for Beko Washing Machine Wtb941r2w and use reference number in list below and click on the link to your part
Reference | Part Number | Description |
---|---|---|
2804980200 End Of Life | NTC | |
2811570200 End Of Life | MODULE HOLDER | |
1 | 2425300100 End Of Life | TOP FRAME ASSEMBLY |
1 | 2467700100 End Of Life | TOP FRAME ASSEMBLY |
10 | 2496600100 | FRONT DOOR ASSEMBLY BX XL |
10 | 2453800100 End Of Life | FRONT DOOR ASSEMBLY BX XL |
100 | 2000811400 | AIR PIPE HOSE L=610 mm |
1008 | 2829960200 | PULLEY FIXING SCREW |
103 | 2814430100 End Of Life | HOSE CLAMP |
103 | 2814430200 End Of Life | HOSE CLAMP |
106 | 2426000200 | HOSE -WATER INLET SLIM-COLD |
106 | 2906860700 | HOSE -WATER INLET SLIM-COLD |
106 | 2906760300 End Of Life | HOSE -WATER INLET -COLD |
1096 | 2836970300 | SCREW (4x11) |
1096 | 2836970500 | SCREW (4x11) |
11 | 2842650100 End Of Life | DOOR GLASS |
1106 | 2907190600 | HOSE |
117 | 2818440200 | TUB INLET HOSE. |
1210 | 2865200100 | TUB-FILTER HOSE ASSEMBLY COMPLETE |
1210 | 2477900100 | TUB FILTER HOSE ASSEMBLY BALL SYSTEM |
1210 | 2478000100 | TUB FILTER HOSE ASSEMBLY COMPLETE |
1227 | 2707340300 | PUMP PROTECTIVE COVER |
1227 | 2707340400 | PUMP PROTECTIVE COVER |
13 | 2847740400 | DOOR LOCK |
13 | 2847740500 | DOOR LOCK |
1363 | 2500703900 | WELDED TUB ASSY |
1384 | 2882601600 End Of Life | HEATER ASSEMBLY without NICHEL |
1384 | 2863403000 | HEATER ASSEMBLY without NICHEL |
1384 | 2850360100 | HEATER ASSEMBLY |
1396 | 2451509012 | LIGHT GUIDE BUTTON ASSMBLY |
14 | 2858570200 | PLASTIC HINGE |
14 | 2850610100 | BX XL HINGE |
1406 | 2820820100 | CHASSIS FLAP |
1442 | 2817050400 | SHOCK ABSORBER PIN |
1459 | 2826440100 | FRONT WALL HOLDER |
146 | 2421701000 | DETERGENT BOX GROUP |
1460 | 2826450100 | FRONT WALL HOLDER PIN |
1467 | 9003860800 | SCREW. |
1467 | 9003860400 | SCREW. |
1470 | 2833820100 | CABINET ASSEMBLY AND BACK COVER |
149 | 2831721000 | COUNTERWEIGHT-LOWER |
149 | 2831721400 End Of Life | COUNTERWEIGHT-LOWER |
1520 | 2830690100 | CABLE HOLDER |
1521 | 2834480100 | CABLE HOLDER |
1528 | 2828820400 | PANEL GASKET |
1529 | 2831380100 | CABLE HOLDER |
1535 | 2826420100 | HOSE HOLDER |
1537 | 2843030200 | FLAME BARRIER |
1537 | 2858780100 | FLAME BARRIER |
1540 | 2833362392 | ENERGY VALUE LABEL |
1575 | 2858560300 | TERMINAK SHEET |
1575 | 2858560100 | TERMINAK SHEET |
1585 | 2850850100 | PUMP COVER ARCP1 |
1586 | 2850840100 | PUMP COVER HOLDER |
1592 | 2707730400 | PLASTIC SCREW 3x4_5 |
16 | 2835320100 | HINGE SUPPORT BRACKET |
162 | 2003721600 | CONDENSATOR ANTIINTERFERENTA |
162 | 2834310400 | INTERFERENCE SUPPRESSOR |
162 | 2827981200 | INTERFERENCE SUPPRESSOR |
1640 | 2819711100 End Of Life | PRESSURE SWITCH |
1640 | 2833830400 | PRESSURE SENSOR METALFLEX |
1646 | 2829010100 | SHOCK ABSORBER |
1657 | 2841630200 | HEXAGON NUT FİBER |
166 | 2834083000 | MAIN CABLE HARNESS |
1660 | 2840820200 | INPUT IMPEDANCE COIL foil |
1686 | 2002374300 | HOSE CLAMP (ø 1.8) |
169 | 2836390900 | POWER CORD ASSY. |
1701 | 2837560100 | PINNED CABLE CONNECTOR |
1740 | 2850820100 | ENCODER PROTECTION PART |
1741 | 2850350100 | INNER PART |
1785 | 9003611200 | SHEET METAL SCREW(B4_2x11.5-TOOTHED) |
18 | 2912700500 End Of Life | ADJUSTABLE FEET ASSEMBLY |
18 | 2912701400 | ADJUSTABLE FEET ASSEMBLY |
1829 | 2849430100 | STOPPER |
1837 | 2443900200 | CUSHION SHEET ASSEMBLY |
1845 | 9003272500 | PLASTIC SCREW |
186 | 2844510200 | MAIN BOARD |
1862 | 2450000100 | PUMPE COVER ASSEMBLY |
1873 | 2848250100 | TOP FRAME FIXING PART LEFT |
1874 | 2847840100 | TOP FRAME FIXING PART RIGHT |
194 | 2880402000 End Of Life | PUMP-FILTER ASSEMBLY(WATER COOLING) |
194 | 2840940200 | PUMP-FILTER ASSEMBLY |
1951 | 2859590100 | CABLE HOLDER |
197 | 2459209019 | DRAWER PANEL |
20 | 2737601600 | TRANSPORT SAFETY ASSEMBLY |
203 | 2451901400 | SELECTOR KNOB ASSEMBLY |
208 | 2451409013 | PANEL BODY ASSY. |
230 | 2603901100 | CABINET BELLOWS CLAMP ASSEMBLY |
25 | 2801540200 | REAR COVER CAP |
25 | 2801540300 | REAR COVER CAP |
33 | 9001230800 | PLASTIC CLAMP 152 mm |
336 | 2421900300 | DRAWER ASSEMBLY |
341 | 2851560200 | PULL OPEN HOOK |
373 | 2803800700 | DISCHARGE HOSE ASSEMBLY |
401 | 2851420800 | FRONT PANEL ARCP1 BX_XL |
411 | 2811230100 | DISCHARGE HOSE HOLDER |
43 | 2820525859 | USER S MANUAL (EN) |
45 | 2816990200 | UPPER COUNTER WEIGHT |
45 | 2816990700 | UPPER COUNTER WEIGHT |
53 | 2820360300 | SUSPENSION SPRING |
54 | 2466300300 | DOOR HOOD-RUBBER ASSY |
55 | 2802580600 | DOOR GASKET SPRING |
552 | 2002370600 | HOSE CLAMP (Ø 13.3) |
553 | 2000610200 | HOSE. |
56 | 2816660200 | PULLEY |
59 | 2845710200 End Of Life | ELASTIC POLY-V BELT |
59 | 2816750200 End Of Life | ELASTIC POLY-V BELT (5 TOOTH BELT) |
598 | 2872700100 | FILTER ASSEMBLY |
60 | 2834030100 | Screw |
617 | 2703940700 | FELT (SIDE PANEL) |
63 | 2834820200 | MOTOR |
658 | 9003860200 | SCREW. |
66 | 2816871100 | SHOCK ABSORBER |
677 | 2808740200 | STOPPER. |
679 | 2844290100 End Of Life | INPUT IMPEDERENCE INDUCTOR GROUP |
679 | 2841790200 End Of Life | INPUT IMPEDERENCE INDUCTOR GROUP |
679 | 2889400300 | INPUT IMPEDERENCE INDUCTOR GROUP |
679 | 2841790100 End Of Life | INPUT IMPEDERENCE INDUCTOR GROUP |
682 | 2811250100 | M8 x 1_25 FLANGED NUT |
7 | 2827610100 | BACK COVER WHITE |
719 | 2853580100 | PLUG HOLDER(NATURAL) |
719 | 2811260100 | PLUG HOLDER(NATURAL) |
719 | 2811260300 | PLUG HOLDER(NATURAL) |
723 | 2839500100 | DC MODULE HOLDER |
737 | 2906850200 | WATER INLET VALVE |
737 | 2906870200 | WATER INLET VALVE |
737 | 2836480100 | WATER INLET VALVE |
748 | 2817690101 | DC MODULE |
78 | 2801430400 | SHOCK ABSORBER PIN |
78 | 2801430300 | SHOCK ABSORBER PIN |
78 | 2817050300 | SHOCK ABSORBER PIN |
797 | 2831320200 | Cable Holder |
797 | 2831370100 | CABLE HOLDER |
80 | 2898400200 | SPECIAL BOLT. |
820 | 2834830300 | SHEET SCREW (SELF ADJUSTING THREADING) |
827 | 2832240400 | TOP SUPPORT BRACKET |
8325 | 181300303 | M4X10 TAPTITE SCREW. |
8331 | 371202407 | Carbon Brush Assembly (L24MF7_39mm) |
8335 | 372205506 | Tacho Assembly |
8336 | 373500801 End Of Life | Tachometer Cover.. |
8355 | 2002371700 | HOSE CLAMP (Ø 28_7) |
8359 | 2002372400 | HOSE CLAMP (Ø 38.8) |
8365 | 2828040300 | DRAIN HOSE HOLDER |
8365 | 2002740200 | DRAIN HOSE HOLDER |
8384 | 9003270100 | PLASTIC SCREW |
8385 | 9003270400 | PLASTIC SCREW (4_10) |
8396 | 111201020 | BOLT (AM5x10 DIN 7985 4.8-H) |
8397 | 9003610500 | SHEET METAL SCREW(B4_2x9_5-TOOTHED) |
8397 | 9003610900 | SHEET METAL SCREW (B4.2x9.5 K=8 TOOTHED |
8398 | 9003670100 | SCREW FOR PLASTIC -4.5x12 |
8399 | 9003270900 | PLASTIC SCREW |
8412 | 2831790100 | SPECIAL SHEET SREW |
8416 | 2832450100 | PLASTIC SCREW |
8419 | 2963340100 End Of Life | WASHERED NUT (M6x1) |
8419 | 9001230300 | PLASTIC CLAMP 100 mm |
8430 | 2826150100 | HOSE CLAMP |
8431 | 2826150200 | HOSE CLAMP |
9 | 2850940100 | HANDLE BX XL |
93 | 2704480100 | HOSE HOLDER |
953 | 2903090500 | DOOR LOCK WATER PROTECTOR |
964 | 2845310300 | CARD PROTECTOR FOIL |