CDA CD200 SS Cooker Oven not heating up

Oven stopped heating up after tripping the fuse. Thermostat light still comes on. Grill still works. So I assume it's the element. The existing element is ELE4532 230V 2400W. Have you a replacement for this? Thanks.

Howard

When turning your CDA CD200SS oven on and encountering the electric tripping out usually means there is a problem with your fan oven element. First thing would be to test the element to be sure. I have added a video below to guide you through testing the fan oven element.

I have listed the part required and added some videos to help guide you through the installation of the fan oven element for your CDA CD200SS   oven

For your future reference, I’ve included some Common faults with these CDA CD200SS Oven cookers to assist you in the future or anyone else reading this.

 usually when turning the oven on and encountering the electric tripping out usually means there is a problem with your fan oven element. First thing would be to test the element to be sure. I have added a video below to guide you through testing the fan oven element.

I have also listed the part required to replace the fan oven element. I have placed some videos as well to help guide you through the installation of the new part.

For your future reference, I’ve included some Common faults with these SMEG DOSC36X or DOSC54X Oven cookers to assist you in the future or anyone else reading this.

• The oven will not turn on

The first thing you need to check is that the oven timer is not on auto if it is, turn it on to manual.

• No Heat in Oven

If the fan is running and the thermostat light comes on but you get no heat (or just the thermostat light on in non-fan ovens and cookers) then the probability is that the fan element or oven elements have failed.

• Electricity trips (Rcd) when I turn the oven on or grill

This is normally an element that has gone to earth, This is a well-known fault with electric ovens, the insulation breaks down in the elements and trips the RCD , best way is to stick a meter on each element and check that they have not got earth leaks on them. But this can also be a wiring fault.

• The grill element doesn't work

This would usually indicate that the grill element is faulty. Check these: Grill element, Oven changeover switch, Overheat thermostat, Main oven thermostat, if used to regulate the grill temperature.

• The CDA CD200SS Oven fan is not working or spinning correctly (slow) or is noisy

The fan motor may need to be replaced see video on this also the cooling fan motor can cause same problems.

• The CDA CD200SS Oven overheats and burns everything

Normally this is a simple thermostat failure which would manifest itself as this symptom.

• The CDA CD200SS Oven or cooker cuts out after it's been on for a while

This is an overheating problem which can be caused by the fan motor or main oven thermostat or a faulty safety thermostat that will be causing the problem. It can also be caused by a failure of the cooling fan, where fitted, but usually these go noisy before failing, Safety thermostats are used to prevent the oven or cooker overheating and will shut the oven down.