Hoover dynamic next DXC9TCE-80 Tumble dryer E21 error code
Every time I start the dryer and turn for the program that I want it tells me E21
Maria pereira
I will try and help with this problem Hoover dynamic next DXC9TCE-80 Tumble dryer
There were three different models of this machine please check your identification number before ordering any parts
DX C9TCEB-80 31100876 1734 (26/08/2017) U.K.
DX C9TCE-80 31100883 1733 (17/08/2017) ALL MARKETS
DX C9TCER-80 31101055 1824 (12/06/2018) ALL MARKETS
E21 error code
Heater control relay on the “cuore” electric module is not working. High temperature has been reached – Thermo Fuse worked. Check the thermo Fuse, and the wiring. Check that both the ventilation circuit and ventilation ducts are clean and duct is not obstructed. Replace the “cuore” electric module only in the case that the heater command relay is faulty
I have added some videos below to assist you in replacing either the heater or the relay on the circuit board you will also want to check the two thermostats not the one top of the heater
here are all the area codes for this machine
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page
goes for about 1 miminit and red light comes on and stops
it goes for about i minit then it stops red light on and stops no water in the tank on door thanks