HOTPOINT FDL 570G R ON/OFF, WASH AND END LEDS FLASHING
I will try and help with this problem HOTPOINT AQUARIUS FDL 570 dishwasher when the pump is running all the time this is usually caused by an error or the anti-flood device which is built into the bottom of the dishwasher the program will automatically go into safety mode when either a fault or a leak is detected.
the first thing I would do is take the bottom of the machine off and inspect if there is any leaks then I would also do a test on the heating system as this is a common fault on the machine you will need to use a Multimeter and I have I did a video below to assist you in checking the heating element
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page
If you need any further assistance please feel free to contact me. all the best Paul.
 |
Paul Charmbury
Appliances Engineer     |
full list of spare parts for this model below
Our How-to-repair stores
-
Dishwasher Heater Element 1650W 240V C00256527 Without Hose.
Category: Recycle Appliances
£22.00
One Response to “HOTPOINT FDL 570G R ON/OFF, WASH AND END LEDS FLASHING”
Hotpoint HFC3C26 W SV UK dishwasher
Error F15 (start and play/purse) LED flashing.
Error is coming in at different stages of program.
Have checked and cleared all obvious areas, cleared drainage pipe at point where joins sink waste pipe.
Thanks
Kind Regards