Hotpoint Single Oven SI6874SPIX is not heating when on fan mode.

by / Wednesday, 13 January 2021 / Published in

My oven Hotpoint is not making heat. When I use my cooker on grilled the cooker is working perfectly but when I select the fan oven there is no heat could you point me in the right direction the light is on and I can hear the fan motor tuning

Jane Williams

Paul answers

I will try and help with your Hotpoint Single Oven SI6874SPIX problem

If your main oven is not heating then it may be a problem with the fan oven element as you can see in the diagram below, I have included a video showing you how to test the element and how to replace it they do vary from Coker of the cooker, as this oven is controlled by a circuit board there is a possibility that you may have a problem with this, you will also need to have a look at the thermostat on the timer

 

For your future reference I’ve included some Common faults with these Hotpoint Single Oven SI6874SPIX cookers to assist you in the future or anyone else reading this.

  • The oven will not turn on
    The first thing you need to check is that the oven timer is not on auto if it is turn it on to manual.
  • No Heat in Oven
    If the fan is running and the thermostat light comes on but you get no heat (or just the thermostat light on in non-fan ovens and cookers) then the probability is that the fan element or oven elements have failed.
  • Electricity trips (Rcd) when I turn the oven on or grill
    This is normally an element that has gone to earth, This is a well-known fault with electric ovens, the insulation breaks down in the elements and trips the RCD , best way is to stick a meter on each element and check that they have not got earth leaks on them. But this can also be a wiring fault.
  • The grill element doesn't work
    This would usually indicate that the grill element is faulty. Check these: Grill element, Oven changeover switch, Overheat thermostat, Main oven thermostat, if used to regulate the grill temperature.
  • The oven fan is not working or spinning correctly (slow) or is noisy
    The fan motor may need to be replaced see video on this also the cooling fan motor can cause same problems.
  • The oven overheats and burns everything
    Normally this is a simple thermostat failure which would manifest itself as this symptom.
  • The oven or cooker cuts out after it's been on for a while
    This is an overheating problem which can be caused by the fan motor or main oven thermostat or a faulty safety thermostat that will be causing the problem. It can also be caused by a failure of the cooling fan, where fitted, but usually these go noisy before failing, Safety thermostats are used to prevent the oven or cooker overheating and will shut the oven down.

 

If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.

YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page

 

If you need any further assistance please feel free to contact me​. all the best Paul​.

photo  
Paul Charmbury
Appliances Engineer
youtube facebook google+ beer

Match your part for Hotpoint Single Oven SI6874SPIX and use reference number in list below and click on the link to your part

Hotpoint Single Oven SI6874SPIX spare parts

Reference Part Number Description
0005 C00398408 REAR PANEL OVEN
0005 C00627741 REAR PANEL OVEN
0251 C00317554 PROFILE VENTILATOR
0252 C00316558 TRIM LOWER
0400 C00398051 HINGE OVEN DOOR BRER A-SOFT 2 PZ
0470 C00312426 HINGE RUNNING MECHAN ISM
0470 C00628004 HINGE RUNNING MECHAN ISM (BRERA/NS)
1100 C00386489 DOOR HANDLE MATERIA
1101 C00336781 RUBBER DOOR HANDLE
1102 C00311265 WASHER DOOR HANDLE
1214 C00314324 EXHAUST FUME
1215 C00315391 SPACER
1300 C00311963 DOOR LOCK ASSEMBLY
1300 C00627974 DOOR LOCK SOLENOID A SSEMBLY
1410 C00480734 OVEN DOOR OUTER ASSE BLY
1420 C00314487 OVEN DOOR INNER GLAS
1430 C00316660 DOOR GLASS
1431 C00314505 SUPPORT OVEN GLASS
1433 C00315425 SUPPORT OVEN GLASS
1910 C00318929 GASKET DOOR
2010 C00382894 FAN COVER
2450 C00325778 GRID OVEN
2452 C00386603 GRID OVEN UK
2460 C00344938 BAKING TRAY BLACK
2470 C00344931 FAT PAN BLACK
2480 C00322873 KIT MOTOR TURNSPIT + ROTARY SPIT
2481 C00322028 TURNSPIT SUPPORT
2610 C00379899 GRID SUPPORT MINERVA LEFT/RIGHT
3010 C00386491 CONTROL PANEL FI6 IX HA
3560 C00311180 DISPLAY G2 EVO ANALO GUE
3561 C00314591 CONTROL UNIT ASSEMBL
3561 C00546354 CONTROL UNIT ASSEMBL Y
4400 C00398229 MOTOR FAN
4410 C00314518 AIR COOLING FAN
4430 C00386493 BLOWER FAN FOR MOTOR
4510 C00311196 HEATING ELEMENT CIRC LAR 2000W
4520 C00313436 HEATING ELEMENT UPPE R/GRILL 2450W
4560 C00319574 HEATING ELEMENT LOWE R 1150W 230V
4800 C00316662 CABLE HARNESS TOUCH DISPLAY
4901 C00322504 CABLE CLAMP
4902 C00321790 CAP FEED THROUGH
4910 C00313503 CONNECTION BLOCK
5210 C00398379 POWER UNIT ANTARES
5210 C00629822 POWER UNIT ANTARES P ROG.
5570 C00311049 THERMOSTAT 285°C
5571 C00312761 THERMOSTAT + BRACKET 155°C
6510 C00314191 LAMP HALOGEN 40W 230
6520 C00325786 HALOGEN LAMP COMPLET E ASSEMBLY 40W
6560 C00325847 GLASS COVER
6910 C00311274 TEMPERATURE SENSOR
6942 C00317480 PLUG
6944 C00374986 PLUG SUPPORT
9040 C00322031 SPACER GLASS DOOR
9150 C00386497 FAN NUT
9227 C00333313 WASHER
9640 C00322212 GASKET
9930 C00318668 DAMPER BLACK
9931 C00322502 KIT OVEN FIXATION
999 C00351544 ERROR CODES WHP
999 C00514255 SERVICE MANUAL
999 C00515104 DIMENSIONAL SKETCH W HP
999 C00517288 MAINS CABLE & PLUG U K
999 C00515500 WIRING DIAGRAM WHP
999 C00519364 TESTPROGRAM WHP
999 C00519365 CONFIGURATION DESCRI PTION WHP
999 C00517096 CONFIGURATION CODE W HP
999 C00517097 TECHNICAL DATA WHP
999 5413519 OVEN CENTRE TEMP TES T MANUAL

full list of spare parts for Hotpoint Single Oven SI6874SPIX

Our How-to-repair stores

Current page 1 Total pages 0

  • Cooker Oven Baking Tray 481010674818 450mm x 375mm

    Category: Recycle Appliances

    £26.15
24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.

TOP