indesit iwc8123 washing machine
Hi saw your videos very good great work..I have a washhing machine indesit iwc 8123.. all lights were flashing I was told that if I unplug it then replug swithch on it would work no not so .. I then checked the filter cleaned it checked wheel on pump it was not stuck it was free finished that reconnected my water supply to machine pu plug in switched on power on 13aocket ..pressed on switch on wahing machine all light came on as normal (good).. start light was on (good) pressed start 3h indicator light was on .. no water came in also no red light for door lock came on ..any idea I repeated this a couple of times at 1 time the start light was on as normal the 3hr light was flashing not fast but like a switch on off, on off, Regards Trevor... If I need to replace board can you give me a price I am not near any repair shop and would not be able to repair myself thanks
Trevor
Hi Trevor
before we look at the pcb i suggest you check the door lock see video below
-
How a washing machine door lock or interlock works
-
Flashing Lights & Error/Fault code
-
How a NTC Sensor works on a washing machine
-
How to Replace Indesit Washing Machine Drum Paddle or lifters.
-
How to replace a washing machine door seal on Hotpoint, Indesit, Ariston & Scholtes
-
Error fault codes for Ariston, Hotpoint Indesit, Scholtes washing machines
I have an IWC 8123 Washer. Fills, at least partway (I am not sure how high it should fill) drum turns but wont advance through the wash. This is intermittent. The on off switch does not work so can only be turned off at the mains.