Siemens dishwasher SE 64630GB/13 not starting

by / Friday, 04 December 2015 / Published in

Our Siemens dishwasher wasn't draining so I changed the drain pump for new one from Siemens but the dishwasher is not starting. I can hear a hum sound but no water is coming in. Model number is SE 64630GB/13. Any advise you can offer would be greatly appreciated. Drain hose seems fine. Is there a shut off valve that needs to be reset? many thanks. Ash

Ash

 

 

Paul answers

Paul answers

 

btn-buy-element

Bosch Dishwasher spare parts

 

Hi Ash

The first thing you need to do is check that the water valve is on, as the humming noise you can hear may be the water valve trying to let water in. also check that you have fitted pump correctly as the humming noise might be also the motor jammed 

To assist you with this with repair on your Siemens dishwasher SE 64630GB/13  i have put videos below

 

One Response to “Siemens dishwasher SE 64630GB/13 not starting”

  1. Paul says : Reply

    I have a Bosch dishwasher SH55MO3GB/70, which is not filling with water. I have watched all the videos which suggest inlet vale replacement BUT it is not at front behind kick plate as shown on most machines. The water seems to come in at the back via an Aqua stop valve which I have asked how to check. Is there another inlet valve somewhere that I can’t find?
    Thanks.
    Is it possible to connect an ordinary hose just to test if that solves the problem?

24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.

TOP