Smeg DUSC36X Electrics Trip When Turning Oven On

Hello There, I have a Smeg Cooker, Model No DUSC36X. Anytime when i turn the main oven on all the electrics in the house trip off. Can this be caused by a blown element. If so which element do i need to replace it. Is there anything else in the cooker that could make the electric trip off. Many Thank.

Brien

Paul answers

I will try and help with this problem with your Smeg DUSC36X Electrics Trip When Turning Oven On.

When ever you turn an oven on and the electricity in the house gets tripped off, this usually means the element has gone. The first thing to do is test the element, i have added a video on this page which will guide you through testing the element. I have listed the required element below for you to buy once you have tested the element and confirmed its not working. I have also placed some videos on how to replace the broken element.

For your future reference, I’ve included some Common faults with these Smeg DUSC36X or DUSC54X Oven cookers to assist you in the future or anyone else reading this.

• The oven will not turn on

The first thing you need to check is that the oven timer is not on auto if it is, turn it on to manual.

• No Heat in Oven

If the fan is running and the thermostat light comes on but you get no heat (or just the thermostat light on in non-fan ovens and cookers) then the probability is that the fan element or oven elements have failed.

• Electricity trips (Rcd) when I turn the oven on or grill

This is normally an element that has gone to earth, This is a well-known fault with electric ovens, the insulation breaks down in the elements and trips the RCD , best way is to stick a meter on each element and check that they have not got earth leaks on them. But this can also be a wiring fault.

• The grill element doesn't work

This would usually indicate that the grill element is faulty. Check these: Grill element, Oven changeover switch, Overheat thermostat, Main oven thermostat, if used to regulate the grill temperature.

• TheSmeg DUSC36X or DUSC54X oven fan is not working or spinning correctly (slow) or is noisy

The fan motor may need to be replaced see video on this also the cooling fan motor can cause same problems.

• The Smeg DUSC36X or DUSC54X oven overheats and burns everything

Normally this is a simple thermostat failure which would manifest itself as this symptom.

• The Smeg DUSC36X or DUSC54X oven or cooker cuts out after it's been on for a while

This is an overheating problem which can be caused by the fan motor or main oven thermostat or a faulty safety thermostat that will be causing the problem. It can also be caused by a failure of the cooling fan, where fitted, but usually these go noisy before failing, Safety thermostats are used to prevent the oven or cooker overheating and will shut the oven down.