zanussi zfw1012w door seal replacement

Hi Paul - I need to replace the door seal on my zanussi zfw1012w but it does not have a removable front panel. Please can you advise as I must remove the concrete counterweight Many Thanks! 

Paul O'Riordan

Paul answers

Zanussi zwf1012w washing machine seal

Hi Paul O'Riordan

i think you mean model zwf1012w seal you have only two choices fit through the door hole or take drum out sorry on this model, i have done it many times but i show in the videos me taking the front of so people can see.but it is very hard if you have not done it before also these seals are serial number dependent!!

ive also added some more info to try and help you

Zanussi washing machine, I have put together a full list of videos below on your washing machine. There are many common questions that people ask about these Zanussi. Please have a look at the relevant video to your problem, and if you need more help, feel free to come to us on our live appliance chat during working hours.

Common questions people ask about Zanussiwashing machine.

Zanussi washing machine Won´t Drain, Will not drain, doesn´t drain, does not empty – these are all pump problems, see video on this.

Zanussi washing machine Will not start, won’t start, Will not open – this is usually due to the machine still having water in or a door interlock fault,(sometimes this might be a printed circuit board fault) see video on this.

Zanussi washing machine Will not spin, Wont spin, will not spin, doesn´t spin, fills up but the drum is not turning, won't agitate or spin - drum doesn't move!- these faults can either be motor related, pump related, or there may be a problem with the printed circuit board

Zanussi washing machine Does not take conditioner, is not taking in any water.- these are all water valve related, see videos on this.