Fitting twin compressor Fridge freezer with Elitech ECS-16 Digital Temperature Controller

by / Monday, 25 July 2016 / Published in Fridge & Freezer




How to replace Fridge freezer circuit board with Digatal Temperature Controller

 

This video can be used on all fridge,freezers and chest freezers plus 100's of fridge freezer like. AEG, Arthur-Martin-Elux, Bosch, Electrolux, Hotpoint, Husqvarna, John Lewis, Indesit, Neff, Privileg, Rex, Rosenlew, Siemens, Zanker, Zanussi. we are working on a Bosch Fridge Freezer with a faulty circuit Board.

 

 

This Graph shows what is happening in this fridge freezer after we changed the temperature controler

 

Graph after Fridge freezer set up with ECS-16 220V TEMPERATURE CONTROLLER

As you can see after setting up the fridge at 2 degrees with a hysteresis of 3 the fridge is cycling between 2 and 5 degress

the freezer is set up on -17 with hysteresis of 2 degrees and is cycling between  - 15 and 18 degrees

it will always need some calibration depending on where you fit the sensors

 

Wiring example on ECS-16  fridge freezer

Elitech ECS-16 Digatal Temperature Controller wiring

Elitech ECS-16 Digatal Temperature Controller options on wiring

Before you begin you need to find which controller is best for your fridge freezer.

  • you also need to find the best fitting location.
  • remember always fit in a place where the wiring can be added  easily and that you have enough space to fit the unit.
  • also think where the refrigeration pipes are so you don't damage them when fitting.

4 Responses to “Fitting twin compressor Fridge freezer with Elitech ECS-16 Digital Temperature Controller”

  1. Aurelian says : Reply

    Hello,I want to mount the same thermostat controller like you did, but on my Electrolux , fridge and freezer, I don’t have those plastic parts that you removed where you mounted the sensors probes.
    What can I do ?
    Thanks

    My unit is

    Electrolux
    Model ERB40402W8
    Type CB 4002C
    EN 28187

  2. Juan says : Reply

    Hello, what is this white thing which allow bypassed thermostat? It’s in the first sketch and it supposed to be attached to compresor.

    Thanks

  3. Deborah Snowdon says : Reply

    Hello,
    I have a John Lewis freezer model JLW6006.
    Last week the alarm went off and I was able to cancel the alarm but not the flashing red light. Although the food is slightly softer, especially ice-cream It has not altogether thawed the contents. I have put the freezer to quick freeze setting but still it not not reach the set minus 18. The red light continues to flash the entire time. The freezer is 7 years old but not opened every day perhaps only once or twice a week. It is not overstocked as to reduce airflow inside. I live on a small pension and cannot afford a new freezer of this quality again at the moment. I would like to try to repair it! It is likely to be a thermostat problem or PCB issue? If so, is a PCB easily replaceable? Any advice warmly welcomed. Thank you.

24h technical help answers

Leave a Reply to Juan

TOP