Hotpoint Ariston dishwasher error codes and faults Diagnostic fault finding

by / Thursday, 31 March 2016 / Published in Dishwasher

Dishwasher Error codes

 

 

Hotpoint & Ariston Dishwasher Spare Parts

Hotpoint & Ariston Dishwasher Spare Parts

 

 

When your dishwasher doesn't work you normally get an error code, you may just think it has flashing lights but on most machines they mean something, these are called error codes and are designed in a way to help an engineer or you find the fault with the dishwasher. this article is on  Ariston, Creda, Hotpoint which is made by the Merloni group, The fault codes may be similar. we have added a load of videos at the bottom to help you with your repairs when you work out the problem that you may have . please remember to support our site by shopping for your spare parts with us.

Hotpoint & Ariston Dishwasher error codes

all models of dishwasher have different types of facial panel, whether you have free standing, slimline or integrated dishwasher the error codes may show in a different way, i have include some examples to give you a guideline and will explain more in the videos.

dishwasher error code faults flashing lights

flashing light dishwasher error codes fault

Hotpoint indesit ariston dishwasher error codes faults

Indesit diswasher error codes

F01

Hotpoint & Ariston Dishwasher Error code

 

Anti-flood sensor fault

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: ON
  • LED 2: OFF
  • LED 3: OFF
  • LED 4: OFF

Action: We recommend you check for leaks

F02

Hotpoint & Ariston Dishwasher Error code

Water fill solenoid valve, impeller jug or water chamber failure

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: OFF
  • LED 2: ON
  • LED 3: OFF
  • LED 4: OFF

Action: We recommend you check that water is going to the dishwasher, the valve is working correctly, the impeller jug is functioning correctly, also check the water chamber has no restrictions on the flow rate, if the dishwasher cant fill in the correct amount of time the you will get an error.

F03

Hotpoint & Ariston Dishwasher Error code

Water drain failure/ timeout pump problem

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: ON
  • LED 2: ON
  • LED 3: OFF
  • LED 4: OFF

Action: We recommend you check for blockages in the system and if fitted to your sink unit there may be a restriction there. Debri in the pump housing, faulty pump

F04

Hotpoint & Ariston Dishwasher Error code

Thermostat fault

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: OFF
  • LED 2: OFF
  • LED 3: ON
  • LED 4: OFF

Action: We recommend you check wiring connection and thermostat

F06

Hotpoint & Ariston Dishwasher Error code

Water fill timeout fault

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: OFF
  • LED 2: ON
  • LED 3: ON
  • LED 4: OFF

Action: Please check that the water supply is present and of sufficient pressure, also that the tap is fully on and that the fill hose is not restricted or kinked. Check that water is going to the dishwasher, the valve is working correctly, the impeller jug is functioning correctly, also check the water chamber has no restrictions on the flow rate, if the dishwasher cant fill in the correct amount of time the you will get an error.

F07

Hotpoint & Ariston Dishwasher Error code

Water turbine damaged or fault

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: ON
  • LED 2: ON
  • LED 3: ON
  • LED 4: OFF

Action: Replace water turbine (impeller jug)

F08

Hotpoint & Ariston Dishwasher Error code

Temperature timeout fault

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: OFF
  • LED 2: OFF
  • LED 3: OFF
  • LED 4: ON

Action: We recommend you check heating system element, thermostat, ntc sensor

F09

Hotpoint & Ariston Dishwasher Error code

Software error fault

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: ON
  • LED 2: OFF
  • LED 3: OFF
  • LED 4: ON

Action: this is a fault with the board and normally need reprograming or replacing

F10

Hotpoint & Ariston Dishwasher Error code

Heating element fault

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: OFF
  • LED 2: ON
  • LED 3: OFF
  • LED 4: ON

Action: We recommend you check the element and replace if faulty see our videos on this.

F11

Hotpoint & Ariston Dishwasher Error code

Wash pump motor failure

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: ON
  • LED 2: ON
  • LED 3: OFF
  • LED 4: ON

Action: We recommend you check the motor and replace if it is faulty. also check the capacitor for the motor if fitted. sometimes the motor can seize due to the seal on the main pump failing.

F12

Hotpoint & Ariston Dishwasher Error code

Main board & Display communication error fault

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: OFF
  • LED 2: OFF
  • LED 3: ON
  • LED 4: ON

Action: We recommend you check the wiring for loose connections or you may have faulty board.

F13

Hotpoint & Ariston Dishwasher Error code

Main board fault

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: ON
  • LED 2: OFF
  • LED 3: ON
  • LED 4: ON

Action: We recommend you check the wiring for loose connections or you may have faulty board.

F15

Hotpoint & Ariston Dishwasher Error code

Virtual sensor error fault

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: ON
  • LED 2: ON
  • LED 3: ON
  • LED 4: ON




16 Responses to “Hotpoint Ariston dishwasher error codes and faults Diagnostic fault finding”

  1. ian says : Reply

    Please advise me on how to remedy the faults on my Hotpoint Ariston Dishwasher, Model LK710, Serial No.90204 2418.

    The 2 RED lights near power button are flashing + an AMBER LIGHT (3H)+GREEN LIGHT (End or9h) lights are flashing.

    thanking you

  2. ian says : Reply

    photos can be provided if necessary

  3. adi cioia says : Reply

    I have one LFT 321, and when I give start with program 3 after a few seconds it jumps on program 11 and after that it stops. after jump on program 11 it flashing alternately, the program display.
    I kindly ask what can I do or I must call troubleshooting service.
    thank you

  4. JVip says : Reply

    Hi there – thanks for this, it’s been incredibly helpful.

    I have an issue with my Hotpoint LFT114 dishwasher in that the power button doesn’t work but the Program button turns the machine on and off – I am therefore not able to change the program. Very occasionally it works correctly so it is intermittent; but more often than it does not work properly.

    I’ve taken the front of the machine door off and checked the connections. The ones I can access seem ok as far as I can tell. Is this likely to be a problem with the control panel itself? Should I just replace that?

    Any advice would be appreciated. Thanks 🙂

  5. lesley speak says : Reply

    I have an Ariston LVR 670 dishwasher – pretty old but working perfectly until now. The 2ns and 4th LED light come on and the machine doesn’t seem to be filling with water. Can you tell me what the problem could be.
    Many thanks
    Lesley

  6. Samy Wiliaam says : Reply

    what about error A – 05 at LFF 8254

  7. Ariston hotpoint error code A-2/A-6 says : Reply

    Hi
    Kindly please deploy the result behind Ariston dish washer error code A-2/A-6?
    Regards
    Dashty

    • Ariston hotpoint error code A-2/A-6 says : Reply

      additional information to My dishwasher fault , beside showing A-6 Error in the screen their is a big water leakage in door . please advise how to sort out this issue ,

  8. Ruslan says : Reply


    I have Hotpoint Ariston dishwasher LLD8M121XEU model and it givs F15 errtor code. Any idea to help mach apricisted.

    Regards
    Ruslan

  9. Darrell and Lyn Morrisby says : Reply

    Mine is not a reply it is a question. when I start my Ariston LFF 8M5 dishwasher it sounds like it is pumping in water then after 2mins it sounds like it is releasing water and A-5 starts flashing up where the time usually shows.

  10. toufikou says : Reply

    What to do about error F15 ?

24h technical help answers

Leave a Reply

TOP