Hotpoint Ariston dishwasher error codes and faults Diagnostic fault finding
When your dishwasher doesn't work you normally get an error code, you may just think it has flashing lights but on most machines they mean something, these are called error codes and are designed in a way to help an engineer or you find the fault with the dishwasher. this article is on Ariston, Creda, Hotpoint which is made by the Merloni group, The fault codes may be similar. we have added a load of videos at the bottom to help you with your repairs when you work out the problem that you may have . please remember to support our site by shopping for your spare parts with us.
60 Responses to “Hotpoint Ariston dishwasher error codes and faults Diagnostic fault finding”
hey
i have the model LFF8P112 Ariston ..it dosent work probably it work in minutes instead working hour and half
and i dont know how to fix it ..pleeeeaaasss help
Hi,
I have an Ariston dishwasher (model LST 114 HA) . The led 1 is on and the led 3 is on, what would mean the error F05, but this error is not described above. What is the F05 error ? Thank you.
I have an Ariston dishwasher ldf 12m5 x which has an F13 error code on the display, it sometimes goes all the way through a cycle, but 8 times out of 10 it stops.
Thanks for any assistance you can provide.
Geoff.
Error F13 appears on the display on my Ariston dishwasher, what can I do to fix it?
Hi I have an Ariston LFF8M132 dishwasher that is showing a F15 error . How can I fix it ..thanks
Error f15
F 15, what does it mean and what to do
Good morning.
I have a Hotpoint Dishwasher.
Green lights 1& 4 are flashing?
Assistance please.
Thanking you.
Roy.
the dishwasher goes on fill with water sounds like its going through the cycle then 5mins in goes off and all lights go off….Model Ariston LS1 45/50
I have ARISTON DISHWASHER FOR 8 YEARS .WHEN TURN ON AFTER 1 MINUTE THE CODE A- 4 FLASHING
Thanks for this site i can repair my dishwasher. Thank for your work
I’m glad we could help please remember to support the website by shopping with us, and if we really helped you can always donate by pressing the Buy paul a Beer page
once cycle is completed , sounds like the pump is still going ,, does not stop when all water is drained ,,,I suspect signal to pump that all water is gone is not being received ,, any ideas ?
Ariston Dishwasher model LFF8M122 does not power up. Could it be a fuse?
My hotpoint integrated dishwasher has been put on a no 7 programme. I note the machine after approx 70 minutes has made a noise and sent the programme to number 3 Why is this ?
please send a question with the full model number via contact us page
My hotpoint integrated dishwasher has been put on a no 7 programme. I note the machine after approx 70 minutes has made a noise and sent the programme to number 3 Why is this The Model number is LFT 228 A
If you have a question about a fault on an appliance please use the contact form instead. Questions on faults in the comments will not be answered.
I have Ariston Dishwasher , I got the message “No water Open tab”
the solenoid valve is tested separably and it is working,
no power arrives the solenoid valve
I have a Hotpoint LFT 228A intergrated dishwasher. I do not have the model number. The display is on top of the door. It is showing a red cross in the top left corner. I know it isn’t the salt or rinse aid. It is regularly flushed through. What does the red cross mean, the machine is working but the red cross is there?
Good evening
I have an Hot Point Ariston LDF1235. Dishwasher is showing error A10. How can I repair it ?
Thank You
I have dishwaser model HOTPOINT ARISTON UFF 8214E,and recently stoped working ,on the display blinks A-8 error.Can you explain what kind of error is this and solution.Thank you.
Good morning.
I have a Hotpoint Dishwasher.
Green lights 1& 4 are flashing?
Assistance please.
Thanking you.
Ylber.
Hi there. I have an Ariston dishwasher approx 5 1/2 years old. Has only been used 3-4 times during that period however we have now decided to use it regularly since about 3 weeks ago. However it is not taking the cleaner from the dispenser. Have tried both the powder tablets and a gel cleaner. When it finishes the cycle there ‘s a light displaying an S inside a box that looks like it pouring something out. I’m assuming this is the suds dispenser. Can you help me.
Many thanks
Marg
Have sent a request however didn’t put my email address on it
Above are those details
Thank you
my dishwasher has none of the sequences above what do i do?
sequence
ON
OFF
ON
OFF
HELP