April 19, 2024

Hotpoint Creda tumble dryer how to fit front felt bearing. Part 1

Hotpoint Creda tumble dryer how to fit front felt bearing. Part 1

by / Tuesday, 27 August 2013 / Published in Drum & Bearings, Repair Guides, Tumble Dryers







This video will show you how to replace a front felt bearing on a tumble dryer, we will show dismantle the tumble dryer and replace the felt seal which is also known as the felt bearing.
You will need to remove the front of the machine to gain access to the felt bearing

This video can be used on Ariston, Creda, Edesa, Export, General electric, Indesit and Hotpoint

You will also find the parts that you need around this page

Please see other Tumble Dryer videos on Ariston, Creda, Edesa, Export, General electric, Indesit and Hotpoint

Tagged under: , , ,

4 Responses to “Hotpoint Creda tumble dryer how to fit front felt bearing. Part 1”

  2. Igor says : Reply
    October 9, 2015 at 9:24 am

    Hello to all. I have one problem with Whirlpool AWZ 8665 dryer. The programator switch-off (I hear in programmator some click(s)…) the heating unit after app. 10 sec and no switch-on again until dryer is switched off. Then by new start of dryer the same procedure again…
    I checked NTC and is o.k., also other themperature switches and heating unit are o.k..

    What can cause such dryer work? Thanks in advance for your help and suggestions!

  3. john robson says : Reply
    June 5, 2017 at 3:42 pm

    I have a white knight tumble dryer model cl 37 code=0312 372 15191
    need to replace what looks like felt seal bushes for around the drum
    not looked at front seal will need help in dismantle + identifying parts
    thank you John Robson

24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.

Buy Paul a beer




 
TOP