How to replace a washing machine door seal or gasket on Hoover, Candy, Iberna, Teka, Otsein & Zerowatt.

by / Wednesday, 30 October 2013 / Published in Door Seals & Gaskets, Repair Guides, Washing machines




How to replace a washing machine door seal or gasket on Hoover, Candy, Iberna, Teka, Otsein & Zerowatt

 This video is on how to fit and replace a washing machine door seal or gasket to select models of Candy, Cylinda, Friac, Hoover, Iberna, Kelvinator, Maytag, Neufunk, Otsein, Rosieres, Teka & Zerowatt washing machines.

To order your door seal you will need your full model number. (This is normally around the washing machine door frame on a sticker)

Clean-the-surface-before-fitting-the-new-replacement-door-seal-to-your-appliance

line-up-the-drain-holes-on-the-seal-with-the-bottom-of-the-drum

How-to-replace-a-Candy-washing-machine-door-seal

Make-sure-you-get-the-washing-machine-door-seal-fitted-correctly-over-the-rim-or-lip-of-the-drum.

Remove-the-tension-ring-holding-the-seal-to-the-washing-machine-drum

remove-the-old-door-seal-from-the-washing-machine-inner-drum

How-to-replace-a-hoover-washing-machine-door-seal

replacing-gasket-onto-the-main-front-panel




This video is on how to fit and replace a washing machine door seal or gasket to select models of Candy, Cylinda, Friac, Hoover, Iberna, Kelvinator, Maytag, Neufunk, Otsein, Rosieres, Teka & Zerowatt washing machines.

  • Disconnect the power on the washing machine. Make sure you’re unplugged from the mains before you do any work on an electrical appliance.
  • Remove the lid on your washing machine.
  • Remove the tension ring under the rim of the seal at the front
  • Flip the whole seal into the drum.
  • Remove the tension ring holding the seal to the outer tub or drum.
  • Now remove the old door seal from the washing machine inner drum.
  • Clean the surface before fitting the new replacement door seal to your appliance.
  • Make sure you get the washing machine door seal fitted correctly over the rim or lip of the drum.
  • Make sure you line up the drain holes on the seal with the bottom of the drum.
  • Fit the outer lip of the gasket onto the main front panel without any creases.
  • Fit the tension ring back on to the front of the seal.
  • Reverse of the process to put the washing machine panels back on.
  • See video for full details as this is not an easy job as the front panel does not come off.

One Response to “How to replace a washing machine door seal or gasket on Hoover, Candy, Iberna, Teka, Otsein & Zerowatt.”

  1. Peter Foy says : Reply

    Where does the adhesive fibre door seal on a Candy GOC58F dryer fit ?

24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.

TOP