How to replace a washing machine door seal or gasket on Hoover, Candy, Iberna, Teka, Otsein & Zerowatt.
by Paul Charmbury
/
Wednesday, 30 October 2013
/
Published in Door Seals & Gaskets, Repair Guides, Washing machines
How to replace a washing machine door seal or gasket on Hoover, Candy, Iberna, Teka, Otsein & Zerowatt
This video is on how to fit and replace a washing machine door seal or gasket to select models of Candy, Cylinda, Friac, Hoover, Iberna, Kelvinator, Maytag, Neufunk, Otsein, Rosieres, Teka & Zerowatt washing machines.
To order your door seal you will need your full model number. (This is normally around the washing machine door frame on a sticker)
This video is on how to fit and replace a washing machine door seal or gasket to select models of Candy, Cylinda, Friac, Hoover, Iberna, Kelvinator, Maytag, Neufunk, Otsein, Rosieres, Teka & Zerowatt washing machines.
- Disconnect the power on the washing machine. Make sure you’re unplugged from the mains before you do any work on an electrical appliance.
- Remove the lid on your washing machine.
- Remove the tension ring under the rim of the seal at the front
- Flip the whole seal into the drum.
- Remove the tension ring holding the seal to the outer tub or drum.
- Now remove the old door seal from the washing machine inner drum.
- Clean the surface before fitting the new replacement door seal to your appliance.
- Make sure you get the washing machine door seal fitted correctly over the rim or lip of the drum.
- Make sure you line up the drain holes on the seal with the bottom of the drum.
- Fit the outer lip of the gasket onto the main front panel without any creases.
- Fit the tension ring back on to the front of the seal.
- Reverse of the process to put the washing machine panels back on.
- See video for full details as this is not an easy job as the front panel does not come off.
Tagged under:
How to replace a washing machine door gasket, replace a washing machine door seal, replace washing machine door gasket, replacing a washing machine door seal
Where does the adhesive fibre door seal on a Candy GOC58F dryer fit ?