How to Replace Bearings and Drum Spindle in a Tumble Dryer. Part 2

by / Saturday, 03 August 2013 / Published in Drum & Bearings, Repair Guides, Tumble Dryers







This video will show you how to replace the bearings and drum spindle in a tumble dryer.
it can also be used on all these models: Ariston, Asko, Aspes, Bluesky, Bomann, Brandt, Brother, Clatronic, Creda,Crusader, Edesa, Electra, Eurotech, Export, Exquisit, Friac, General electric, Hotpoint, Indesit, Jackson, Proline, Upo and white Westinghouse.

We will show how to dismantle the tumble dryer and replace the bearing and shaft spindle this job is not hard but you will need some special tools like a pot rivet gun to attach the spindle to the tumble dryer drum watch both video on this.

Tumble Dryer Bearings

Tumble Dryer Bearings

 

3 Responses to “How to Replace Bearings and Drum Spindle in a Tumble Dryer. Part 2”

  1. David Scott says : Reply

    Grateful if you’ll advise on how the bottom brackets at the front of the drier are fitted. I took them off to release the front and cannot remember how they go back!
    Many thanks for any help

    David

24h technical help answers

Leave a comment below or click the banner above to ask your own question.

TOP