How to replace Washing Machine Selni motor carbon brushes

by / Thursday, 27 March 2014 / Published in Motors, Washing machines




How to replace Washing Machine Selni motor carbon brushes

SELNI MOTOR CARBON BRUSHES

If your washing machine is not spinning or it is filling with water but the drum is not turning then it is a good chance that you carbon brushes have worn out on De Dietrich, Thomson, Creda, Edesa, Indesit, Ocean, Siemens, Savema, Vedette washing machines.

To order your washing machine motor Carbon Brushes you will need your full model number (This is normally around the washing machine door frame on a sticker) and also your motor Type, written on the motor Label.

Selni motor carbon brushes on De dietrich, Thomson, Creda, Edesa, Indesit, Ocean, Siemens, Savema, Vedette.

replacing-Selni-motor-carbon-brushes-on-Blomberg-Brandt-Fagor-De-dietrich-Thomson-etc

How-to-replace-Selni-motor-id-label-on-Blomberg-Brandt-Fagor-De-dietrich-Thomson-etc

old-and-new-Selni-motor-carbon-brushes-on-Blomberg-Brandt-Fagor-De-dietrich-Thomson-etc

removing-the-belt-on-Blomberg-Brandt-Fagor-De-dietrich-Thomson-etc




This video will show you how to replace your washing machine carbon brushes with a Selni motor, this guide is good for most makes that have a Selni motor.

To take out a motor on a washing machine might sound scary, but it’s a surprisingly easy to replace and then fit the carbon brushes.

- Remove the back panel.

- Then you need to remove the washing machine belt that is attached to the motor and drum pulley.

- You will now need to remove the bolts that attach the motor to the washing machine drum.

- Release the motor of the drum brackets or lugs, be careful it’s heavy.

- Next you need to remove the old carbon brushes and fit new ones according to the video instruction.

 

This video will show you how to replace your washing machine carbon brushes with a Selni motor, this guide is good for most makes that have a Selni motor.

To take out a motor on a washing machine might sound scary, but it’s a surprisingly easy to replace and then fit the carbon brushes.

- Remove the back panel.

- Then you need to remove the washing machine belt that is attached to the motor and drum pulley.

- You will now need to remove the bolts that attach the motor to the washing machine drum.

- Release the motor of the drum brackets or lugs, be careful it’s heavy.

- Next you need to remove the old carbon brushes and fit new ones according to the video instruction.

24h technical help answers

Leave a comment below or click the banner above to ask your own question.

TOP