Refine your search
You can refine your search further by entering make and model number if you are looking for parts. If you are looking for tutorials please use appliance type only. If you need help please use FAQs or ask a question in contact us page (make sure you have full model number)
Having trouble with layered Navigation? Watch Video
How do I find my model number?Click Here
How to remove bra wire, coins, screws from a washing machine drum Washing Machine spare parts If your washing machine is making an unusual noise like knocking scraping or scratching, this video will help you remove items from the drum there are also videos below to help you remove items from the sump hose
Samsung washing machines Fault codes and Errors. These codes are used on later models from about 2006 or so onwards.Washing machine and washer dryer models will displayed as a digital code, exactly as you will see below, in an LED or LCD panel or display on the front of the washing machine.Before you start any
Samsung washing machine DE error code Door lock fault not activating in Allocated Time This tutorial will show you how to identify a Door Interlock fault on Samsung washing machines the error code DE will normally show. Samsung Washing Machine door lock/interlock Samsung washing machine DE Error code means that the door is open or you may have
Samsung washing machine 5E or 2E error code Fault.Pump fault not emptying in Allocated Time This tutorial will show you how to identify a filling fault on Samsung washing machines the error code are 4E and E1 on early models. Samsung Washing Machine Pumps Samsung washing machine Not emptying in allocated time error code 5E or 2E Pump
Samsung Washing Machine 4E and E1 Fault Not filling in Allocated Time This tutorial will show you how to identify a filling fault on Samsung washing machines the error code are 4E and E1 on early models. Samsung Washing Machine Parts Samsung washing machine Not filling in allocated time error code 4E and E1 Fault This
Hi good afternoon I am looking for parts for my washer dryer it is made by Hoover HBWD 8514DAC-80 31800310 I am having problems with the tumble dryer heater and I suspect it may be Heating Element or one of the sensors
Hi, this machine complete washing cycles without any error… but with cold water. I have changed heating element and temperature sensor, but still only cold water washing. Do you have any similar experience? And do you have any recommendations?
the problem is the dryer comes on however no power to the dryer element at all . It runs cold. All thermostats reading ok – changed main pcb , humidity probe and temp probe – no blockages . Any ideas Pnc: 914605818 00
Hi I have a stuck nail between the front of the drums. I have removed the heating element as per you video but as it is head up has not fallen through. I have tried a magnet between the drums but it is not reaching it. Any suggestions please.
Hi, i have a dryer fault and I followed your youtube video Without luck. I wonder if you can advise please ?
This error is n ER73 NTC thermistor fault on the drying duct. I replaced this (Lefthand side) and the lower washer One without success.
The machine intially doesn’t get the drum warm on cottons or synthetics and the time runs down too fast. A second run usually works.
I tested the condenser thermostats ontop of the heating element and the heating element and these are all good.
In frustration I found a replacement white Dryer PCB but again no luck and Err73 persists.
I am out of ideas. As it does get hot I think8ng relay rather than sensor ?
Any help appreciated