Refine your search
You can refine your search further by entering make and model number if you are looking for parts. If you are looking for tutorials please use appliance type only. If you need help please use FAQs or ask a question in contact us page (make sure you have full model number)
Having trouble with layered Navigation? Watch Video
How do I find my model number?Click Here
Our How-to-repair eBay stores
Other eBay Stores
This video will show you how to replace or service a condenser tumble dryer pump Whirlpool, Bauknecht, Laden & Maytag condenser tumble dryers Spare parts To remove the condenser tumble dryer pump unit you need to do the following.The 6th sense Whirlpool, Bauknecht, Laden & Maytag condenser tumble dryers dry the cloths by heating
How to service a Condenser Tumble Dryer pump unit, Indesit, Proline, Creda, Ariston & Hotpoint. Condenser Tumble Dryer Pump Parts Also See our Video on How a Tumble Dryer Works! On Ariston, Export, Hotpoint-Ariston, Hotpoint, Indesit Tumble Dryers condenser dryers the main difference is that the expelled air will pass over a
Condenser Tumble Dryer Keeps Showing Empty Light and Not Turning. Condenser Tumble Dryer Pump Parts Also see our video on How a Tumble Dryer Works! If your Condenser Tumble Dryer keeps showing the empty light and the tumble dryer will not start then this video will teach you how
Condenser tumble dryer not heating up Diagnostic HelpCondenser tumble dryer Spare Parts Condenser tumble dryer are relatively easy for most people fix if they are reasonably competent in DIY and working with electrical products as they really are rather simple appliances This video can be used on all these makes of Condenser tumble dryer AEG,
This video will show how to diagnose the fault on your tumble dryer when it is not turning or spinning Tumble Dryer Capacitors If your Bosch, Siemens, Constructa, Gaggenau, Viking, etctumble dryer is not turning or you can only hear a low humming noise with no drum action then it is probably your capacitor
John Lewis Condenser Heat Pump Tumble Dryer JLTDH17 switching of to early, or resetting tocupboard dry from extra dry
Hi i have problem with JLTDH17 finishing after few minutes. I was trying to clean the electrodes, but it seems doesn’t cure the problem. Is the next step to change main board? and how much would it cost?
Good morning, I have had this tumble dryer for a few years now and recently I have noticed that when the Float rises up and pressed the float switch. The Empty water light comes on. My question is…. should the machine cut out when the empty water light comes on? and if so what parts should I look into to replace this fault?
I am electric engineer and I’m sure I could replace what ever is faulty, but…actually I don’t know what is this..can you help me please?
The tumble dryer wasn’t producing heat so i stripped it down to find some wire on the compressor corroded and not connected to one of the terminals. I cleaned everything up and replaced the connectors but it’s stil not producing heat. I have also checked the capacitors and they are fine. I also checked the two NTC sensors and they are ok as well. Do you have any suggestions pleae?
Hi, pump runs when 230v placed across the terminals, float level switch opens/closes, continuity of cabling from pump and switch to PCB connecter confirmed OK
I suspect main board but cant remove knob to examine board, thoughts?