Refine your search
You can refine your search further by entering make and model number if you are looking for parts. If you are looking for tutorials please use appliance type only. If you need help please use FAQs or ask a question in contact us page (make sure you have full model number)
Having trouble with layered Navigation? Watch Video
Our How-to-repair stores
Washing machine pressure switch, how to fit, replace and Diagnose the fault related to it
Washing machine pressure switch, how to fit, replace and Diagnose the fault. Washing Machine Pressure Switches This video will show you the associated faults with a washing machine pressure switch and air chamber. To order your washing machine pressure switch you will need your full model number (This is normally around the washing machine door
How to remove a washing machine sump hose and filter to clear blockages
How to clear a blokage in a washing machine cleaning sump hose Washing Machine spare parts We have made 3 videos on clearing blockages in washing machines, this one will show you how to clear the sump hose and filter, the other videos below will show you how to clear a pump and
Beko washing machine not filling with water Error code E08
Beko washing machine wmb series not filling with water Error code E08 Beko Washing Machine Spare Parts Diagnosing the Beko washing machine error Replacing & checking the water valve Take lid off and also 2 check for kinked water pipe Checking the water valve open circuit Testing the good water valve How to enter
Samsung Washing Machine Fault Codes & Washer Dryer Models
Samsung washing machines Fault codes and Errors. These codes are used on later models from about 2006 or so onwards.Washing machine and washer dryer models will displayed as a digital code, exactly as you will see below, in an LED or LCD panel or display on the front of the washing machine.Before you start any
Samsung washing machine error code 4E and E1 Fault Not filling in Allocated Time
Samsung Washing Machine 4E and E1 Fault Not filling in Allocated Time This tutorial will show you how to identify a filling fault on Samsung washing machines the error code are 4E and E1 on early models. Samsung Washing Machine Parts Samsung washing machine Not filling in allocated time error code 4E and E1 Fault This
Zanussi Washing Machine ZWH7122J E31 error code
Hi I have done all the test procedures on my zanussi washing ZWH 7122J.
It is very similar to the one in your demo.
On test position 8 an error code E31 comes up, can you tell me what this is as I was told E31 is door lock but your list says a pressure switch I think?
Thanks in advance.
P.S. and a price for the part ta
Samsung Wd806u4sagd washing machine Fills then stops displays error code 4e
Machine fills then error code appears 4e machine then drains and continues to display 4e message. I have checked
All parts relating to water supply and this still happens I have changed pressure switch also!
Hoover vision tech D2 VT914D22S/1-80 washing machine error 3 and doesn’t fast spin
Hoover VT914D22S/1-80N 3100534612365065 Hi, initially my machine has a heater fault code along with the error 3 draining fault code. I have cleaned the heater and all of the pipes, checked the water inlet vales and the discharge pump are operating ok, I have disconnected the tube from the pressure switch and made sure air passes freely too. The machine now only shows error code 3 after any wash cycle, it also doesn’t seem to fill with much water when any programme starts either , it doesn’t spin at high speed on any wash cycle either, the drum does turn normally during the wash cycle. I wondered if I should buy a new pressure switch or it may be a pcb issue? Can you let me know what you think or ask me any questions you can to help me see if it’s worth fixing or not?
feel free to call me if you wish.
I also note that the main plastic drum housing is welded not screwed together, there isn’t a pressure chamber externally for the pressure switch tube, I presume if there is one it must be inside this welded housing? I did poke a 2.5mm wire inside the hole where the tube connects onto the housing to ensure it was clear and when I reconnected the tube and blew down is was clear.
I think that’s everything I’ve done.
Many Thanks Matt,
AEG Lavomat 63210 washing machine Fills itself up and overflows every now and then
Not sure wether I need a pressure switch or new solenoids can you please help and supply necessary parts.
Hotpoint washing machine bearing change in Newport South Wales
Hi Paul! our washing machine Hotpoint Aquarious has become very noisy and i was wondering if you can replace the bearings for me, as i don’t think i have the tools to do this type of job Chris Paul answers Hi Chris yes we do do call outs but only in