Refine your search
You can refine your search further by entering make and model number if you are looking for parts. If you are looking for tutorials please use appliance type only. If you need help please use FAQs or ask a question in contact us page (make sure you have full model number)
Having trouble with layered Navigation? Watch Video
Our How-to-repair stores
Washing machine starts then stops or turns off, Testing printed circuit board PCB capacitor
How to test washing machine cuircuit boards for blown capacitors If your washing machine starts and then stops or turns off and all the lights go out or the digital display goes blank there is a good chance you may have a fault with the circuit board. You may have a bad connection, a dry joint
How to remove a washing machine sump hose and filter to clear blockages
How to clear a blokage in a washing machine cleaning sump hose Washing Machine spare parts We have made 3 videos on clearing blockages in washing machines, this one will show you how to clear the sump hose and filter, the other videos below will show you how to clear a pump and
How to open Washing machine Filter that is stuck or Jammed
Washing machine Filter stuck or just wont open, How to remove coins screws and bra wires etc also how to service the pump Washing Machine Pump Filters If you have a washing machine pump filter is jammed or stuck and you can’t open it do not force it. This video will show you how
How to Remove Items from a washing machine drum like bra wire, coins, screws
How to remove bra wire, coins, screws from a washing machine drum Washing Machine spare parts If your washing machine is making an unusual noise like knocking scraping or scratching, this video will help you remove items from the drum there are also videos below to help you remove items from the sump hose
Beko washing machine not filling with water Error code E08
Beko washing machine wmb series not filling with water Error code E08 Beko Washing Machine Spare Parts Diagnosing the Beko washing machine error Replacing & checking the water valve Take lid off and also 2 check for kinked water pipe Checking the water valve open circuit Testing the good water valve How to enter
Bosch Washing Machine WAP28360GB MAXX9 CONTROL PANEL SWITCHING OFF NO FAULT CODE
HI PAUL THANKS FOR YOUR PROMPT REPLY TODAY SPENT SOME HRS TODAY TRYING TO FIND FAULT
1 CHANGED FILTER WITH SPARE I HAD FAULT STILL THE SAME, REFITTED OLD
2 REMOVED DOOR SWITCH
CHECKED OK, REFITTED
3 RECHECKED ALL WIRING AND PLUGS ALL SEEM OK
THIS IS WHAT I THINK
I SET MACHINE TO DRAIN
PUMP ON OK, PANEL SHOWING SPIN LIGHT ON
BUT NO MOVEMENT OF DRUM, EVEN WHEN I HAD PROGRAM SET TO 15 MIN WASH IT FILLED STARTED
AGITATING OK HEATER HAD 240V THEN WHEN I THINK IS WAS SUPERPOSED TO SPIN the WHOLE MACHINE SHUT DOWN, THE ECO SILENT DRIVE HAS An INVERTER
IN A BOX AT BOTTOM
I HAVE NOT HAD IT OUT YET BUT WHAT DO YOU THINK IF THE MACHINE CAN’T SPIN WOULD IT SHUT DOWN OR JUST SETTING PROGRAMMER TO A SETTING THEN AFTER 30 ODD SECONDS MACHINE SHUTS DOWN IS IT CHECKING THEN FINDS A PROBLEM WITH INVERTER OR MOTOR AND SHUTS DOWN? BUT NO-FAULT CODE OR PERHAPS THIS MODEL DOES NOT HAVE A FAULT CODE FOR INVERTER? IT IS NICE TO HAVE SOMEBODY TO ASK ABOUT THE PROBLEM
I RETIRED BUT BEN A MAINTENANCE ENG ALL MY WORKING LIFE
MANY THANKS BOB FRI 21.50
Hotpoint WMBF742P washing machine is not emptying
The washing machine does not empty nor spins. Clothes are stuck wet inside. I’ve looked into the pump filter but don’t see anything jammed in there.
Siemens WXLM166AGB/01 washing machine blocked filter
Hi The plate on the bottom of the machine, underneath it, seems to be riveted onto the frame. How do I get to the filter/pump?
Bosch EXXCEL 8 Washing Machine WAQ28461GB Wont drain pump spinning working but noisy
all pipes clear, taken off and checked front filter removed and checked
Beko WMB71642w washing machine won’t drain
Hi
We have a WMB71642W that doesn’t want to drain. I did get the machine into diagnostic mode and it showed E05. I opened the filter at the bottom and cleared (also flooded garage). I tried the diagnostic again and the code shown up was 15 18. I can’t find anything for this but it seems that it still won’t drain. Is this going to be the pump or control board, or is it something else?
regards…