Refine your search
You can refine your search further by entering make and model number if you are looking for parts. If you are looking for tutorials please use appliance type only. If you need help please use FAQs or ask a question in contact us page (make sure you have full model number)
Having trouble with layered Navigation? Watch Video
We're busy building a brand new shop! In the meantime, find what you need at our partner website.
Our How-to-repair stores
How to replace a tumble dryer belt Hoover or Candy
How to replace a belt on Hoover or Candy tumble dryers Search and purchase Tumble dryer belts Removing facial panel to gain access to screw Remove screws a base Remove door undo all wiring that is in the way. Take phots Hoover and Candy tumble dryers are notoriously hard to work on, specially if you don’t know
Hoover Candy Tumble dryer drum not turning and belt ok faulty capacitor
Video showing how to replace the capacitor and test it Tumble dryer capacitors. Search and purchase with size in Uf or model number This post shows you how to diagnose and repair a Hoover Candy tumble dryer with a faulty capacitor can be used on some Maytag, Helkama, Kelvinator, Otsein, Teka, Terzismo, Zerowatt Models. You will
Hoover Candy Tumble dryer all lights flashing error fault code
Hoover Candy Tumble dryer all lights flashing error fault code Search and purchaseTumble dryer spares This video will explain how the error codes may be displayed on your Hoover or Candy tumble dryer and some Maytag, Helkama, Kelvinator, Otsein, Teka, Terzismo, Zerowatt models. We will explain what they might mean, there is
How to service a Hoover Candy condenser tumble dryers
Hoover Candy condenser tumble dryer servicing finding faults and diagnosing problems Diagnostic HelpHoover Candy Condenser tumble dryer Spare Parts Hoover Candy Condenser tumble dryer are relatively easy for most people to fix if they are reasonably competent in DIY and working with electrical products as they really are rather simple appliances This video can be
Hoover Candy tumble dryer empty water Indicator flashing, runs for a few seconds then stops
Tumble Dryer Float Switch This video shows you Hoover and Candy tumble dryers flashing the full water indicator light. This is most commonly caused exactly because the water container is full of water, so make sure to empty it every time you dry clothes on it. The other error that may cause this is possible the pressure
Hoover Condenser Tumble Dryer VHC380-80 Stops after approx 60 minutes with empty water light on
Hello. My mum tells me her dryer is doing the following.
– Runs for approx 60 minutes then stops and the empty water light turns ON.
– Check of the water tank finds there’s not a lot of water in it.
– Emptied water tank.
– Dryer won’t restart after 5, 10 and 15 minues have passed but will start after 20-30 minutes has elapsed since stopping.
– Dryer then stops again after approx 60 minutes with empty water light ON.
– The above repeats.
– The dryer is heating up, turning and changing direction.
– There are no other lights on except the empty water when the dryer stops.
It appears the dryer is cutting out and with it being able to restart after 20-30 minutes perhaps though this was the thermal control cut out but the empty water light is a question mark given the water tank is no where near full – to quote my mum ‘there’s hardly any water in the tank when it stops’.
I’ve watched your excellent video about servicing a Hoover dryer and hope you’ll point me in the right direction before I buy the parts to fix it. I see Hoover supply pressure switches, NTC’s and heater but not the thermostats (that I could find in the spares list).
Any advice about possible cause and parts would be very much appreciated.
Thank you.
Rob
Candy GVS C9DCGB-80 condenser tumble dryer E22 error code the fault is it stops after a few secs
Stops whatever cycle after less than 30secs with E22 all lights flashing alarm. Have followed your videos and have continuity on safety thermostat but I don’t seem to have continuity on the other one, but I don’t seem to have a link cable. Tried continuity by taking off each wire but still nothing. Can’t find this part on spares websites.
Zanussi ZDC5350W Tumble Dryer E50 intermittent fault
Hi, my Zanussi condenser dryer has a regular but intermittent fault. It will sometimes complete a drying program but frequently will start running and sometime later which can be a couple of minutes or longer it will stop and display a flashing E50 error. I have taken top and side panels off and tried cleaning
Candy cdc266 uk tumble dryer parts and help videos plus wiring
Candy cdc266 uk wiring need pleasejohn Paul answers Candy cdc266 uk condensor tumble dryer Spare Parts Hi john Candy cdc266 uk condensor tumble dryer here are the photos of the wiring to help you and there are a load of videos below to help you with the repairs model number Candy cdc266 uk
BEKO Condenser Sensor Drier Model DHR 73431 water pouring from the condenser
Re Re BEKO Condenser Sensor Drier Model DHR 73431 Serial number 15-200305-07 Good morning. Your advice please. The above drier is just over a year old. At the end of the drying cycle, both sensor lights for the water collection tray and filter who the need for emptying/cleaning. But removing the filter assembly results in