Refine your search
You can refine your search further by entering make and model number if you are looking for parts. If you are looking for tutorials please use appliance type only. If you need help please use FAQs or ask a question in contact us page (make sure you have full model number)
Having trouble with layered Navigation? Watch Video
Our How-to-repair stores
How to remove a washing machine sump hose and filter to clear blockages
How to clear a blokage in a washing machine cleaning sump hose Washing Machine spare parts We have made 3 videos on clearing blockages in washing machines, this one will show you how to clear the sump hose and filter, the other videos below will show you how to clear a pump and
How to open Washing machine Filter that is stuck or Jammed
Washing machine Filter stuck or just wont open, How to remove coins screws and bra wires etc also how to service the pump Washing Machine Pump Filters If you have a washing machine pump filter is jammed or stuck and you can’t open it do not force it. This video will show you how
How to Remove Items from a washing machine drum like bra wire, coins, screws
How to remove bra wire, coins, screws from a washing machine drum Washing Machine spare parts If your washing machine is making an unusual noise like knocking scraping or scratching, this video will help you remove items from the drum there are also videos below to help you remove items from the sump hose
Beko washing machine wmb 7, 8, 9 Series diagnostic & test mode
How to enter test mode on Beko wmb 7, 8, 9 Series washing machines diagnostic & test mode to repair faults and test errors Beko DiagnosticBeko washing machine Spare Parts Important notice on Beko Before entering test mode please be aware that you are not meant to leave the washing machine Unattended. There is a
Beko washing machine not filling with water Error code E08
Beko washing machine wmb series not filling with water Error code E08 Beko Washing Machine Spare Parts Diagnosing the Beko washing machine error Replacing & checking the water valve Take lid off and also 2 check for kinked water pipe Checking the water valve open circuit Testing the good water valve How to enter
Bosch Washing Machine WAP28360GB MAXX9 CONTROL PANEL SWITCHING OFF NO FAULT CODE
HI PAUL THANKS FOR YOUR PROMPT REPLY TODAY SPENT SOME HRS TODAY TRYING TO FIND FAULT
1 CHANGED FILTER WITH SPARE I HAD FAULT STILL THE SAME, REFITTED OLD
2 REMOVED DOOR SWITCH
CHECKED OK, REFITTED
3 RECHECKED ALL WIRING AND PLUGS ALL SEEM OK
THIS IS WHAT I THINK
I SET MACHINE TO DRAIN
PUMP ON OK, PANEL SHOWING SPIN LIGHT ON
BUT NO MOVEMENT OF DRUM, EVEN WHEN I HAD PROGRAM SET TO 15 MIN WASH IT FILLED STARTED
AGITATING OK HEATER HAD 240V THEN WHEN I THINK IS WAS SUPERPOSED TO SPIN the WHOLE MACHINE SHUT DOWN, THE ECO SILENT DRIVE HAS An INVERTER
IN A BOX AT BOTTOM
I HAVE NOT HAD IT OUT YET BUT WHAT DO YOU THINK IF THE MACHINE CAN’T SPIN WOULD IT SHUT DOWN OR JUST SETTING PROGRAMMER TO A SETTING THEN AFTER 30 ODD SECONDS MACHINE SHUTS DOWN IS IT CHECKING THEN FINDS A PROBLEM WITH INVERTER OR MOTOR AND SHUTS DOWN? BUT NO-FAULT CODE OR PERHAPS THIS MODEL DOES NOT HAVE A FAULT CODE FOR INVERTER? IT IS NICE TO HAVE SOMEBODY TO ASK ABOUT THE PROBLEM
I RETIRED BUT BEN A MAINTENANCE ENG ALL MY WORKING LIFE
MANY THANKS BOB FRI 21.50
Bosch washing machine WFL2463GB/12 Motor seized
Hi, can you advise if there is anywhere I might be able to obtain a new bearings/armature repair kit or spares for the motor as it’s seized up?
Thanks in advance.
John Lewis JLWD1610 Washing Machine Dryer not heating
Drying cycle runs, pumps run, dryer blower fan runs, no voltage at the heating element(s), thermal cut out has continuity, another (temperature/thermistor ??) sensor mounted on the side of the heater chamber has continuity. All wire look fine/not damaged or loose. Temperature? sensor just before the warm air inlet into the drum has no continuity, suspect this is the fault?? It has numbers 12466410 and 88910511. Does this seem likely – if I’m right can you supply the spare part please?
Whirlpool washing machine AWOC 7109 , 6th Sence showed F 12
Hi .I am Thet. I am using Whirlpool washing machine AWOC 7109 , 6th Sence. I had problem and error code showed F 12 but don’t know how to fix it. Please help. we do not use water heater as well. Thanks and waiting from your reply.. Thet Paul answersWhirlpool washing machine spare parts
Beko WMA5105 washing machine Machine is jumping around
Beko AA class WMA5105 washing machine Machine is jumping around (lot more than usual)and making very loud clattering (slapping) noise when spinning Piaras Paul answers Beko WMA5105 washing machine Spare Parts Hi Piaras I would check for movement in the bearings on the drum also if the machine is not emptying