Refine your search
You can refine your search further by entering make and model number if you are looking for parts. If you are looking for tutorials please use appliance type only. If you need help please use FAQs or ask a question in contact us page (make sure you have full model number)
Having trouble with layered Navigation? Watch Video
Our How-to-repair stores
Replace vented tumble dryer belt Aeg, Electrolux & Zanussi Etc
How to replace a belt on a Vented tumble dryer Zanussi, Electrolux & Aeg Tumble Dryer Belts The first thing you will notice if your tumble dryer belt has snapped, is the dryer is making a motor noise but the drum is not turning or the dryer is not drying. If the drum in
Condenser tumble dryer not heating up Aeg, Electrolux & Zanussi Etc
Condenser tumble dryer not heating up Diagnostic HelpCondenser tumble dryer Spare Parts Condenser tumble dryer are relatively easy for most people fix if they are reasonably competent in DIY and working with electrical products as they really are rather simple appliances This video can be used on all these makes of Condenser tumble dryer AEG,
Printed Circuit Board Repairs for Tumble dryers AEG, Electrolux, Zanussi Etc
The video is on a common repair that i have to do on the ENV06 PCB and will show you just one of the faults that can occur Tumble Dryer Parts Even if you’re not a technician or an engineer, some Tumble dryer printed circuit board problems are obvious. Some common and simple problems can cause
E21, E22 Error Code, Tumble Dryer Pump Fault AEG, Electrolux, Zanussi Etc
Condenser Tumble Dryer Pump Parts This video will help you understand the fault and show you how to replace your pump or float switch. These error codes are normally related to a Tumble Dryer Pump Fault E21, E22 Error Codes are listed below. Also see our video on How a Tumble Dryer
E61, E62, E63, E64, E65, E66, E67 Tumble dryer Error Fault Code Electrolux, AEG, Zanussi
E61, E62, E63, E64, E65, E66, E67 Tumble dryer Error Fault Code Electrolux, AEG, Zanussi Also see our videos on how a Tumble Dryer WorksTumble Dryer Spare Parts These error codes are for ENVo6 Cuirct boards tumble dryer Electrolux, AEG, Arthur Martin, Elektro Helios, Eureka, Faure, Frigidaire, Gibson Appliance, Husqvarna, Kelvinator, Marijnen, Parkinson Cowan, Progress,
AEG tumble dryer T59880 problem
I have an AEG tumble dryer T59880 (product number 91609662700). Some time ago my dryer simply stopped working. With help of your tutorials I managed to get error code E22. I followed your youtube video (https://www.how-to-repair.com/help/e21-e22-error-code-tumble-dryer-pump-fault-aeg-electrolux-zanussi-etc/) about a faulty pump system. I checked the microswitch and the condensate pump for electric resistance. I think the
AEG T65170AV Tumble dryer Not heating
Prod No: 916095259
Drier, not heating, thought it may be element so purchased a replacement via yourselves and followed the tutorial on replacing the part. The new element seemed to work for a couple of wash loads then failed. Spoke with Paul who got me to check the elements and thermostats on the element block. These all tested fine on ohm meter. Elements appear to be fine / heat goes to the drum area when I run machine on diagnostic. Can you assist me here please. I may need to buy another part if required. If you need further info, please get in touch. Thanks & Regards
Derek
AEG T75280AC Tumble dryer not heating. Checking heater ntc sensors and pcb
Hi Paul,
Can you please provide assistance, my tumble dryer is turns on and spins but does not heat up. I have opened it up and checked the heater, it has one thermostat which has tested ok for continuity, the heating coils look intact but I am unable to disconnect the cable to check continuity.
Can you tell me if this appliance has more than 1 thermostat if so where it may be located as I could not find anymore.
Also could it be the circuit board?
Thank you in advance.
Daljeet
John Lewis Tumble Dryer JLDV09 same as AEGT65170AV Displays E60
The drum jammed because the felt/foam seal disintegrated. I have fitted a new seal & the drum rotates ok by hand but error code E60 is displayed when switched on.
Aeg Lavatherm T65170av Tumble Dryer Drum Spins, No Heat, Heater And Thermostats Ok, Cannot Locate Any Others
Hiya, I have an AEG Tumble dryer that is not heating up, when turned on it goes for about 2 minutes then clicks off. No heat coming from heater, drum spins around fine – PNC 91609525906 Lavatherm 65170AV SN:74409680, located the heater and the 2 thermostats at the back of the machine checked for continuity – all OK. Cannot find another thermostat anywhere, checked sides and back and drum inside. Is there another one anywhere???
Located the ntc thermistor, haven’t got a little connector to try and test it properly, I can probably make one tomorrow if you think this is the culprit BUT if the 2 thermostats (AND there is not another one fitted) and the heater are all OK is it likely to be anything else or shall I just order one.