Refine your search
You can refine your search further by entering make and model number if you are looking for parts. If you are looking for tutorials please use appliance type only. If you need help please use FAQs or ask a question in contact us page (make sure you have full model number)
Having trouble with layered Navigation? Watch Video
We're busy building a brand new shop! In the meantime, find what you need at our partner website.
Our How-to-repair stores
Error fault codes for Ariston, Hotpoint Indesit, Scholtes washing machines
Appearance of the control panel of the affected by error codes Washing Machine Parts Technical Data on error codes and faults Ariston, Hotpoint Indesit, Scholtes washing machines with these type of panels Indesit washing machine brands (WI ..), Ariston (QA .., .. AR, AV ..) hotpoint wm,wf etc and Scholtes whose facials are shown on
How to replace a Tumble Dryer fixed drum Riveted Drum shaft
This video will show you how replace a Riveted Drum shaft Creda, Indesit and Hotpoint tumble dryers. Creda, Hotpoint, Indesit Tumble Dryer Shaft Kit (For Riveted Drums) How to replace a Tumble Dryer fixed drum shaft and bearing without having to buy a whole New Drum on Ariston, Export, Hotpoint-Ariston, Hotpoint, Indesit Tumble Dryers.
Hotpoint TDWSF83BEP Stops shortly after starting
Hi Paul TDWSF83BEP Door Filter Light
Im looking for a little assistance into a tumble dryer fault please and the spares i may need. The door filter light comes on, if you push start machine comes back on again but then soon cuts out again with the red light on. So i have investigated and the following has been done.
Tumble dryer does get warm but keeps cutting out with red door light.
I dismantled door filter and cleaned any lint debris from filter and duct.
I removed condenser and cleaned under tap as per instructions found online.
I removed right side of machine and found lint under the NTC sensor by fan motor, removed this lint as thought this was problem, but machine still does the same.
Opened covering here as well and cleaned any lint from here, only minor.
Removed rear heater to look to see if heater had any lint, but hardly any found.
So tested the sensor on top of heater and the thermal fuse, thermal fuse has continuity and sensor has resistance circa 18k Ohm that reduces when warmed as expected, heater tested (not expected faulty as was getting warm) and both coils ok.
tested sensor by fan motor (NTC?) and again this has a resistance and reduces with warmth.
So I inserted a thermocouple close to the two sensors at top of heater to see what was going on and when you start machine it appears to turn heater on which rises to circa 250 Deg C this then reduces down to circa 30 Deg as fan cycles air through. It tries again to heat and it goes to circa 340 Deg C but then stops and lights the door filter light.
Removed and reinstalled connections to pcb by selection knob but no different.
I guess the thing is cutting out because it thinks blocked by lint and overheating but sensors appear to be ok,any help with spot where my thoughts are wrong please and what to test to understand what i need to purchase to repair?
Thanks V Much
Kevin
Spare Parts needed for neff R4380X0EU/04 tumble dryer
Hi Paul! Please quote price for a thermostat for a Neff condensing tumble drier WFD2473GB. Does this model have a reset button I can try ? (drum spins ok but does not heat up) Thanks PS Hi Paul -Sorry – Did not think of checking inside door! The number there is E-Nr R4380XOEU/04 FD7906
Which way do the wires go on Indisit tumble dryer model IDV65(uk)
Hi Paul, please could you assist me? I have an indisit tumble dryer model IDV65(uk). I have purchased a door lock assembly but I have no wiring map. the door assembley is marked up as It has three connections numbered 3,4,5. I have three wires grey, brown and pink/white. Which goes to which? im unable
I need a heater element for my Hotpoint TCUD 97B ULTIMA tumble dryer
Hi, I need a heater element for my Hotpoint TCUD 97B ULTIMA tumble dryer, but don’t know which one to order, I’m sending you some pictures of the element on my machine. ThanksSergio Paul answers Hotpoint TCUD 97B ULTIMA heater element Hi Sergio, Given the pictures you
Hotpoint Aquarius TVM562 Parts needed to rebuild
Hi, Good evening, I have just watched your video on YouTube how to repair a tumble dryer. I was looking on this site for the spare parts…… there are so many! can you help. Our machine is a Hotpoint Aquarius TMV 562. It makes a horrible squeaking noise when turning so presume it needs everything