Hotpoint wmd962 ultima bearing set
Ā hi ,,(wmd962 hotpoint ultima) ,, im looking for the drum bearing kit for this model ,could you please tell me if you sell this.....thank uĀ
Dr ahmed
Ā
Ā
Ā
Ā
Hi Dr ahmed
i will need your full model number to find the part, i think this model has what we call a sealed drum where you cannot change the bearings it is disgustingĀ that the manufacture makes them like this now please have a look at this post to under stand what i mean and feel free toĀ leave your remarksĀ on it. but if you want to go ahead and order the drum the link is here please double check you model number of the id plate.
Ā
Ā
-
How to Fit & Replace Washing Machine Drum Support or Spider
-
How to Check to see if your Washing machine bearings are worn.
-
How to replace a washing machine door seal on Hotpoint, Indesit, Ariston & Scholtes
-
Error fault codes for Ariston, Hotpoint Indesit, Scholtes washing machines
-
How to change washing machine water valve for Hotpoint, Indesit, Proline, LG, Whirlpool, Zanussi
-
How to test a washing machine motor
-
How to replace washing machine motor carbon brushes in a Indesco & welling motors.
-
How to replace washing machine motor carbon brushes C.E.SET Motors
-
How to Replace and fit new Washing Machine Drum Paddle or lifters.
-
How to Replace Indesit Washing Machine Drum Paddle or lifters.
-
How to Change & Diagnose a fault on a pump in a washing machine
how can open the door on this model
Hotpoint WMD642P.
Please will you advise
Behind the pulley wheel I can see a 30mm spindle and a 62mm – outside diameter – bearing race marked 6206Z.
1) What size do you estimate the bearing race to be nearest the drum ?
2) And therefore what bearings set should I buy?
3) Also what spider would you recommend should this become necessary?
Just asking for an educated guess, it doesn’t matter much if wrong. This will just save several wash-less postal days, I want to order in advance of disassembly
After i split the casing to replace the interior bearing race I will drill holes through the weld lip, glue and bolt back together, as per youtube videos on welded drums.
if its out of warrantee (and by that I mean 5/6 years old not 1 year+ as the bearing should not be going after such a short time and is a manufacturing fault not wear and tear!) then you can replace the bearings you have to disassemble the drum, and buy the bearings separately, the cost is a fraction of what the drum is (probably about Ā£5 or less). but its a bit labour intensive! its definitely not worth fixing/ replacing with the drum as this alone is Ā£150!
As above Herman has the right idea! you can replace with some SKF or brammer bearings..