Refine your search
You can refine your search further by entering make and model number if you are looking for parts. If you are looking for tutorials please use appliance type only. If you need help please use FAQs or ask a question in contact us page (make sure you have full model number)
Having trouble with layered Navigation? Watch Video
We're busy building a brand new shop! In the meantime, find what you need at our partner website.
Our How-to-repair stores
Hoover vision tech D2 VT914D22S/1-80 washing machine error 3 and doesn’t fast spin
Hoover VT914D22S/1-80N 3100534612365065 Hi, initially my machine has a heater fault code along with the error 3 draining fault code. I have cleaned the heater and all of the pipes, checked the water inlet vales and the discharge pump are operating ok, I have disconnected the tube from the pressure switch and made sure air passes freely too. The machine now only shows error code 3 after any wash cycle, it also doesn’t seem to fill with much water when any programme starts either , it doesn’t spin at high speed on any wash cycle either, the drum does turn normally during the wash cycle. I wondered if I should buy a new pressure switch or it may be a pcb issue? Can you let me know what you think or ask me any questions you can to help me see if it’s worth fixing or not?
feel free to call me if you wish.
I also note that the main plastic drum housing is welded not screwed together, there isn’t a pressure chamber externally for the pressure switch tube, I presume if there is one it must be inside this welded housing? I did poke a 2.5mm wire inside the hole where the tube connects onto the housing to ensure it was clear and when I reconnected the tube and blew down is was clear.
I think that’s everything I’ve done.
Many Thanks Matt,