I have a cooker which is now not heating, it tripped the electricity Supply during our sunday lunch

my Indesit ID60C2W oven is not heating but the light is on and I can hear the fan motor running you fixed my dryer last month thanks hope you can help

I have a Hotpoint DD2540 built-in oven which is tripping the electrical supply when I use the main oven do you think its the element

Would a faulty element cause the light bulb to fuse? I have a problem with the Beko OTF 22300 built-in oven where the fan is still working, but there is no heat and the bulb has blown also have you instructions for setting the timer clock

Hi there ! The oven after 1min it Tripp’s and gone off can u help me with that what is the problem

When switching to full on the grill switch, the grill goes to half mode instead of full mode. Switching to a lower setting, both elements are on.

Whilst the oven was on set with fan and upper and lower elements on. There was a crackling noise and then the main fuse tripped. With the power back on the fan seems to work but the lower and upper element no longer work. The oven light inside still works. Not sure if the fan element works either.
Any ideas?

Timer appears lifeless… A new timer has today been fitted but the fault remains…It has no visible display.

The oven and grill both work ok, however, with the timer removed they don’t.
This suggests that the Electronic Timer is functioning, but sadly the display appears dead.

I’m looking for a wiring diagram for the oven selector switch, 4 settings, for a Kelvinator KC600SS/BS oven?

The fan turns but very slowly. The heating element does glow red though so that seems to have power