Beko WM5120S washing machine Not running.

by / Monday, 26 June 2017 / Published in

Hi i have a beko WM5120S i have checked for fault codes and found the first LED in the row flashing 2nd and 3 LED are lit constant. When start button pressed the machine will the trip the RCD After approx 3seconds.Any thoughts??Thanks in advance.

GLENN ELLIOTT

Paul answers

I will try and help with this problem Beko WM5120S Washing Machine

This is normally one of only 2 problems - it can either be a fault with a motor, this is usually down to the carbon brushes being worn out, or you may have a problem with the heating element. I have included some videos below to assist you with your repair and also a link to any parts that you may require, if you disconnect the motor and then put the machine on it should then fill with water and not the electric if it is a motor fault, you could do the same with the heating element but make sure you insulate the wires. feel free to contact me if you need more help.

If you need any further assistance please feel free to contact me​. all the best Paul​.

photo  
Paul Charmbury
Appliances Engineer
youtube facebook google+ beer

List of spare parts for Beko WM5120S Washing Machine

Our How-to-repair stores

Current page 1 Total pages 0
  • Washing Machine Door Seal Outer Clamp 2603901200

    Category: Recycle Appliances

    £4.95
  • Beko Washing Machine Adjustable Foot 2912701400

    Category: Recycle Appliances

    £4.50
  • Beko Washing Machine Heating Element 1950W 2850360100

    Category: Recycle Appliances

    £16.60
  • Beko Washing Machine Door Interlock: Metalflex ZV-446 2805310400 With Water Protector 2903090300

    Category: Recycle Appliances

    £8.50
  • Washing Machine Drum Pulley Wheel 2816660200

    Category: Recycle Appliances

    £13.45
24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.

TOP