Beko Condenser Tumble Dryer Making Squeaking Noise | How to Check & Replace Fan Blades?

Beko Condenser Tumble Dryer

Repair Guide for Beko Condenser Tumble Dryer Squeaking Noise Problem

This comprehensive repair guide for the Beko condenser tumble dryer addresses a common issue of excessive noise, often caused by fan blade or belt problems. 

We provide step-by-step instructions for disassembling the dryer, inspecting the belts, and cleaning the fan blades to ensure optimal airflow.

We also include tips for identifying the problem, understanding the replacement part needed, and properly disassembling and cleaning the affected components. 

After reassembly, we test the machine on a cool cycle to ensure smooth operation.

Additionally, you can visit our web store to buy genuine spare parts: https://shop.how-to-repair.com/collections/tumble-dryer-parts 

Safety First!

• Unplug your condenser tumble dryer before starting disassembly.
• Organize screws and parts meticulously to avoid confusion during reassembly.

Tools You'll Need:

• Screwdrivers (various sizes)
• Replacement fan blade (if needed, part number in the video description)

Let's Begin!

The First Step Is Listening to Your Tumble Dryer Squeaking Noise!

As a first evaluation, you should perform a full visual check of the dryer, including both the exterior and internal components. Look for any evidence of unusual noise, such as rattling or squeaking, and make a mental note of where the noises appear to come from. Keep an eye out for lint or debris accumulation in the filter system and between the panels. These buildups can not only increase noise difficulties, but also signal a lack of regular maintenance, which could be the fundamental source of the problem.

Now It's Time for Cleaning and Disassembling Tumble Dryer

Disassembly:

1. Begin the disassembly process by locating and removing the two screws positioned on the lid of the dryer.
2. Take care to use the appropriate screwdriver size to avoid stripping the screws.
3. Unscrew the screws along the sides and underneath the machine, ensuring all fasteners are removed to safely access the internal components.

Belt Inspection:

1. Manually rotate the drum to simulate its operation and listen for the source of the noise.
2. You can use a flashlight to inspect both the primary and secondary belts for any visible signs of damage, such as fraying, cracking, or stretching. 

Cleaning Fan Blades:

1. After gaining access to the fan blades, carefully lift the catch to expose the forward fan blade.
2. Use a soft brush to gently remove accumulated fluff and debris from the blades' surfaces.
3. Areas such as the edges and crevices of the blades collect fluff buildup, which may obstruct airflow.

Now Identify and Fix Your Beko Clothes Dryer's Problem 

Identifying the Issue:

1. Check the back fan blade and surrounding components to determine the underlying cause of the noise.
2. Consider factors such as excessive heat buildup, plastic warping, or mechanical wear and tear. 

Replacement Part and Preparation:

1. Note down the replacement part number (296 2930200) for the back fan blade and understand its D-shape design for correct fitting onto the shaft.
2. Prepare the necessary tools for the replacement process.

Disassembling Back Fan Blade:

1. To remove the damaged back fan blade, securely grip the motor shaft with one hand while using the appropriate tool to loosen and remove the retaining nut.
2. Avoid excessive force or improper handling since it could damage the shaft or surrounding components.
3. Once the nut is removed, carefully slide the old fan blade off the shaft.

Cleaning and Maintenance:

1. After removing the fan blade, clean the surrounding surfaces, including the motor shaft and inside ducting unit.
2. Use a hot soapy water and a soft brush to remove stubborn dirt and debris.
3. Make sure all surfaces are free from obstructions that could block the airflow.

Motor Inspection:

1. While the fan blade is removed, visually inspect the motor shaft for any signs of wear, corrosion, or misalignment.
2. Look for excessive play or wobbling, which might indicate a broken or worn bearing.
3. Then, clean the motor shaft and its surrounding components to maintain smooth operation and maximum performance.

Secondary Belt Replacement:

1. If necessary, replace the secondary belt using the designated replacement part (part number 491 500303).
2. Remove the old belt from the pulley system with care, and remember the orientation and alignment.
3. Position the new belt equally on the pulleys to ensure optimum tension.

Reassembling Beko Condenser Tumble Dryer

Reassembly:

1. Once all repairs and cleaning tasks are complete, carefully reassemble your Beko condenser tumble dryer in the reverse order of disassembly.
2. Take care to properly align panels and components, then tighten all screws and bolts to prevent rattling or vibration.
3. Please check all connections and wiring again to ensure they are working and safe.

Testing:

1. Plug in your Beko clothes dryer and run a test cycle on a cool setting to observe the operation of the fan blades and belts.
2. Listen for any unusual noises or vibrations that might indicate that more adjustments or repairs are required.

Beko Condenser Tumble Dryer Maintenance Tips:

Regular Cleaning: Develop a routine to clean the filter system and remove accumulated fluff and debris to maintain optimal airflow. 

Inspecting Fan Blades: Periodically check fan blades for dirt, dust, or damage, ensuring they're clean and unobstructed for efficient airflow.

Maintaining Proper Airflow: Clear ducting unit blockages to ensure consistent airflow and prevent overheating and damage to internal components.

Watching Maintenance Videos: You can watch our maintenance videos and explore service manuals for detailed cleaning and maintenance instructions to prolong your Beko tumble dryer’s lifespan.

Related Video: https://www.youtube.com/watch?v=AputyRRpJC8&t=0s 

Beko Tumble Dryer Playlist: https://www.youtube.com/playlist?list=PLnAHZbSarsyF8hkC2iVxQhaov90GahF8F