Siemens XL1400 not washing or spinning
Hi, I\’m keen to attempt a repair of my washing machine (Siemens XL1400). But, I\’m trying to find the fault. Effectively, it comes down to the drum won\’t rotate. The machine fills and empties without a problem, but just makes a \’clicking\’ sound (like a switch) a couple of times when it should be rotating, then sits there and does nothing. I checked the drain, and it isn\’t blocked. I took off the front and took a look at the pump and the motor, and couldn\’t see any issues. Both \’look\’ to be in excellent condition. I did notice that the door seal has a couple of small tears in it (and is leaking a little). The drum rotates easily, so I don\’t think that it\’s the bearings or anything jammed in there. Any ideas. I know that I\’ll need to buy a new door seal, but I don\’t really want to spend money on carbon brushes, or PCB modules, or anything else, if it isn\’t going to actually fix it.
Roger
Hi Roger.
This could be a fault with the motor but first check the brushes see these videos on how to change them and how to find the fault. the testing motor video should only be done if you fave good electrical knowledge.
Siemens washing machine will not spin fault finding guide.
How to replace carbon brushes in a Siemens washing machine
How to test a washing machine motor
Important notice on this test repair!!!
This motor test should only be done by suitably qualified persons.
My wife has a Siemans Washing machine XLM 1400 it does smell we have tried to clean the draw and pipes and have washed with vinegar but it still smell. Any idea what to do? Thanks
regards
siggi
The draw does not empty after washing any idea?
All the best
see this video on how to clean a soap draw
Hi, occasionally do a ‘service wash’ which is to buy some soda crystals (cheap as chips) put some in the drum and do a boil or very hot wash.
Hi my washing machine siemens xl 1400 is taking 3hours instead of normal 1hr 10 mins. It washes for over 2 hours on wash cycle before rinsing and that is unusual. There is some technical issues. I just started recently.
Thank you