Hotpoint EW74 cooker hob element Replacement
by Paul Charmbury
/
Saturday, 24 August 2013
/
Published in Cooker & Oven, Electric Hobs, Repair Guides
This video will show you how to replace, change and fit Hotpoint EW74 cooker hob element.
We will show you a step by step procedure on the process.
We will also show you the cheapest places to buy your Cooker hob element for cooker Hotpoint assemblies around this page.
This video can be used on Hotpoint Ariston,Creda, Indesit.
Tagged under:
how to change cooker hob element, how to fit cooker hob element, how to replace cooker hob element
2 Responses to “Hotpoint EW74 cooker hob element Replacement”
Hi! This was a super helpful video – thank you for taking the time to make everything so clear. The problem I’m having is that the large hob element on our hotpoint cooker just stopped working. It is a mixed element – part halogen lamp and part ceramic heating element. No matter how much I google for the spares their not available. When I did find one a few months back it was over £100 – which I wasn’t going to purchase.
I have three questions – how can I test the element itself to see if the element has malfunctioned or to see if something else in the cooker has malfunctioned?
Second. If it is the element and I need to replace it – is there any way to repair it instead?
Finally, if it has to be replaced – no repair possible. Can I replace it with a pure ceramic element of the same size / wattage (1800w)? The mixed halogen element has an extra set of connections – so I don’t know what to do with those.
Thanks!
Hi i replace my solid plate last week but its not getting red hot but the electrical current is ok
my question is can it be that my cooker plate is fault or they is a problem with the stove