Beko washing machine not filling with water Error code E08

by / Tuesday, 10 May 2016 / Published in Washing machines, Water Systems & Valves




Beko washing machine wmb series not filling with water Error code E08

 

Diagnosing  the Beko washing machine error

Beko washing machine replacing & checking the water valve (800x450)

Replacing & checking the water valve

Beko washing machine is not filling with water (800x450)

Take lid off and also 2 check for kinked water pipe

Beko washing machine checking the water valve (800x450)

Checking the water valve open circuit

Beko washing machine testing the water valve (800x450)

Testing the good water valve

How to enter test mode Beko washing machine to find the fault

If your Beko washing machine is not filling with water or stopping in the cycle then it you may have a water fill problem. You may be getting Beko error code E08.

The problem may be one of these.

  • Faulty tap going to washing machine.
  • Kinked water pipe.
  • Water valve filter may be blocked.
  • Water valve solenoid may have failed.
  • Bad connection to valve or Pcb.
  • Faulty wiring.
  • Also check pressure switch.
  • Faulty pcb.

 

This video can be used on all these models and many more.

WMB81431LW, WMB71231B, WMB61631W, WM5141W, WM5141S, WMB71422S, WMP601W, WMP541W, WMB81241LS, WML72S, WASH814DW, WMC6100W, WMB61021W, WMB71642S, WMB61431W, WMC6140W, WMB71021W, WMB61631S, WMB81241LB, WML72B, WMP652W, WMP631S, WM74135W, WMB61221S, WMB71231S, WM74155LW, WM74155LS, WMB61431S, WMB51221W, WM622W, WMB61431B, WMD61W, WMB51221S, WMP501S, WMB61221W, WM7355S, WMB81221LS, WMC6100S, WMB81241LW, WML72WXC, WMC6120W, WMB91242LB, WML15105D, WM5100W, WME8227W, WMB71442W, WM85135LW, WME7227W, WME7247W, WM5100S, WMC62W, WM6123W, WME7267W, WMC61W, WM6103W, WM6123S, WME7227S, WM6167W, WME8227S, WM5121W, WM6111W, WMP621W, WM612W, WM6355W, WME7247S, WMC61S, WM5121S, WM6167S, WME7267S, WM7335W, WME8227B, WMB91242LC, WMI71641, WMI7462, WMI71441, WMB71231W, WME7227B

15 Responses to “Beko washing machine not filling with water Error code E08”

  1. Ian Yoxall says : Reply

    Hi Paul, Beko WM71442W.
    Problem is when selecting a different temperature setting via the temp button, will work ok on default mode of 30c
    Problem is when trying to step through to alternative temp, faults to 90c !!
    Q. Is this push button fault or pub fault.
    If so how much for pub etc,
    Cheers, IAN

  2. Hi..

    My BEKO washing machine model no. W8772B displayed E08 error code. I have changed the solenoid valve & the pressure switch but it did not solve the problem.. What should I look next?..

    Should I change the PCB main controller ?

    Fisa

  3. snurabdul says : Reply

    my beko displayed E07 WHEN I WANT TO TEASTED IT please help me to fix it

  4. STeve says : Reply

    Hi, I have checked both valves and they both read about 4ohms but o think your video said should be about 12. Seems odd both are the same, does this mean I have to replace them?

  5. Elizabeth says : Reply

    F13 error displayed on beko wmb91442 lw before the lights stay on
    Can u advice please on what’s wrong

  6. Wayne jones I have a beko WMB91442LW AND ITS COMING UP WITH A FAULT 0406 what is it as the washer is not spining could u plz tell me what is plz thanks a lot wayne jones says : Reply

    I am trying to do a beko WMB91442LW and its not spining so can u plz let me know what 0406 is on a fault with this number plz thanks very much Wayne Jones thanks a lot for helping us all mate

  7. Haroon says : Reply

    I have replaced drain pump. Now water keep draining however if I empty drain pump manually, water stays for a while but as soon as drain pump fills machine start filling and draining at same time. How this problem can be fix?

  8. Peter Jennings says : Reply

    Wm74155Ls Thanks for your videos. So kind. My machine is just as you described. E08 no water entering. Not got much experience with electronics but happy to change parts. I’m going to order the relevant part as described in the article and take it from there. Thanks again for your help to all us out in the world who would be lost without your kindness.

  9. Gary says : Reply

    I have error code E08, but if I do the wash a 2nd time it works fine, I just need to add more powder as the first lot washes away. Will this be the same problem.

    Gary.

  10. Guido says : Reply

    Hi, my beko wash machine wont `take water in appear on the screen C d8 F10 could be the solenoid ? measure 600 1200 1300 or something else, solenoid n` 32813P C 20056804. could send me the email of the store to bay a part please. Thanks.

  11. dougie says : Reply

    hi mywashing machine wmb71642 door wont lock display states locked but i can still open it

  12. Hannah Birchall says : Reply

    My washing machine keeps pausing and showing a tap sign with a line across it what dose this mean please

  13. Raymond Liddell says : Reply

    Why do people bother asking questions when no one gets an answer?…..

  14. ann smyth says : Reply

    my beko washing machine leaves sudsin drum at end of tried using only tiny bit liquet detergant stillhappining

  15. Craig Davies says : Reply

    Hi I have a beko wmb71442w I start a cycle then it stops at 1.25 mins 30 mins and then 12 mins. I have to press start every time it get to those times for it to start moving again till it gets to the next point, the water trickles into the detergent depositor, so my guess is the inlet valve? any advice is much appreciated.

24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.

TOP