Is your washing machine failing to start? does it seem to fill and drain at the same time? Is the display showing E7 or E07 error code?

If so you have a fault with the water level sensor in you Beko washing machine. 

Your Beko washing machine may also be displaying an E7 Error code. If you have the LED version of the machine this is displayed in BCD format (Binary Code Decimal) This video will explain it in Full

The Beko WTK Series E7 or E07 Error code explainer video

This tutorial will help on all Beko WTK72011 WTK74011 WTK82011 WTK84011 WTK94121 WTK10412 Series washing machines.

It will also help with all the brands that Beko manufacture for

Aftron, Ahma, Alpari, Altus, Ansonic, Arcelik, Arctic, Aya, Baoerma, Beko, Belling, Beta, Blanco, Blomberg, Bluesky, Bomann, Brandt, Bru, Carrefour Home, Codini, Continental Edison, Crystal, Cucine, Cylinda, Defy, Ecron, Elba, Elektra Bregenz, Elettrozeta, Elin, Elvita, Eskimo, Essentielb, Far, Federal, Fensa, Fisher & Paykel, Flavel, Fortress, Friac, Fricon, Generalmatic, Gplus, Grundig, Haka, Hyundai, IFB, Kenwood, Keysmart, Konka, Lamona, Leader, Listo, Majestic, Montpellier, New World, Nikkei, Nortline, Oceania, Oceanic, Orion, Pars, Peabody, Perfect, Philco, Princess, Prolux, Raymond, Royal, Saba, Saivod, SanGiorgio, Sang, Schaub Lorenz, Selecline, Siera, Singer, Speed, Starke, Superfrost, Tecnogas, Tophouse, Venus, Vico, Victory, Videocon, Wasco, Westpoint, White-Westinghouse, Winstar, Wpro, Zenith,

How does a Beko Washing machine Water Level Sensor work?

A 5V analog water level sensor is used. This sensor ensures that the water level is determined instantly with the frequency values which it generates against the pressure created. There are frequency values corresponding to the all pressure values. An infinite number of levels can be determined in the analog water level sensor. Water levels change according to the wash criteria of the designed program depending on the selected program, temperature and auxiliary function. Analog water level sensors are pressure – displacement inverter components in general. Analog water level sensors generate frequency modulation as output. There are basically 2 capacitors, 1 coil and an inverter circuit on itself or the control system to which it is connected. Pressure increase pushes a ferrite part inside the sensor into the coil. Therefore L (inductance) value of coil winding changes and the output value of the sensor – inverter system changes. Therefore pressure value can be measured in an analog manner. The amount of water to be taken in for the programs is controlled by the water meters. Water level sensor serves the basic functions of deciding to take in water again, control the heater safety level, door opening level or foam level. Also, if there are any error in the water meters or its connections, water is taken in with the water level sensor.

Water Level Sensor

Cable inputs 5VDC / Data / GND.

Operating Voltage : 5 VDC When it is empty, 625 ± 2 Hz frequency value should be read from the Data and GND terminals

If you need to replace the Water Level Sensor on your Beko WTK series Washing Machine We may be able to help. Click here for parts 

How to Repair Beko Washing Machine WTK E07 or E7 error code

1. Is the machine displaying E7 or E07 error?
2. Are the Level Sensor socket and the control card KN2 socket fitted and are the connections secure? if No Repair the socket and cables. If yes Replace the level sensor
3. After repairing the cables or replacing the Sensor try to start a programme again.