BEKO WM5100W washing machine will not spin
I have a problem with my Beko WM5100, sometimes it spins and sometimes it doesn´t. I´ve been having intermittent problems for the last 2 weeks, saw one of your videos, but really i do not know where to start looking.
Domingos
Paul answers
Beko WM5100 washing machine Spare Parts
Hi Domingos
I would check under the motor faults first, see videos below. I have also included some useful links here
To try and help with this problem on your Beko washing machine, I have put together a full list of videos below on your washing machine. There are many common questions that people ask about these Beko´s. Please have a look at the relevant video to your problem, and if you need more help, feel free to come to us on our live appliance chat during working hours.
Common questions people ask about on this model of washing machine BEKO WM5100S, BEKO WM5100W.
Beko washing machine Won´t Drain, Will not drain, doesn´t drain, does not empty – these are all pump problems, see video on this.
Beko washing machine Will not start, won’t start, Will not open – this is usually due to the machine still having water in or a door interlock fault,(sometimes this might be a printed circuit board fault) see video on this.
Beko washing machine Will not spin, Wont spin, will not spin, doesn´t spin, fills up but the drum is not turning, won't agitate or spin - drum doesn't move!- these faults can either be motor related, pump related, or there may be a problem with the printed circuit board
Beko washing machine Does not take conditioner, is not taking in any water.- these are all water valve related, see videos on this.
One Response to “BEKO WM5100W washing machine will not spin”
Have a Beko WM5100W washer which was not spinning or washing, I changed the brushes , the old ones were well worn, but still had a bit of life in them, I tested the machine, it filled up as normal but the motor then went into a high speed spin for a few seconds & then stopped, my son said that is what it was doing before I changed the brushes, the pump seems to be working fine, before I change the board is there anything else I should be looking at?.