Bosch Neff Siemens 00626210 Replacement of 00609091 00611119 00644828 Cooker Oven Side Shelf Holder Mounting Kit

Many customers have problems in understanding how this kit fits in your oven I have put an exploded diagram below and some detailed drawings on how to fit this

Paul Charmbury

I will try and help with this problem these old part numbers have replaced by 00626210 oven rack shelf bush kit

old part numbers where 00609091 00611119 00644828

the fault with this part is that the cast aluminum insert brakes in half and a lot of people think it is the incorrect part. the other half of the broken piece falls into the outer part of the oven which you cannot see until you strip the cooker. I have put the instructions below and a diagram to help you.

Before ordering the kit make sure your model of the cooker is listed in the item before purchasing as there are some other types that are slightly different and won't fit like 00420673

1. You will need to remove the cooker from its housing to be able to work on this.
2. you will have to remove the outer side panel on the cooker and remove the insulation to gain access to the clip area.
3. The cast aluminium insert is the parts that normally brakes in half. this part is fitted from the inside of the oven cavity.
4. The clip slides in to the aluminum insert once fitted, this is fitted from the outside of the cooker. The clip holds it tight to the oven cavity.
5. you will need to replace the insulation covering the clip
6. test the Shelf mounting kit that it is operating correctly
7. put the cooker panels back and slide it back in its housing

If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.

YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page