Hotpoint WMA10P washing machine Bearings failed
Following up one-to-one consultation request for 1pm today:I put new bearings in a Hotpoint WMA machine a couple of months ago, but evidently the seal was not right and the bearings are failing due to the grease washing out of them. I wonder if you could have a chat / look to see if there is any obvious problem with the seal and / or my installation of it. Thanks.
Simon
I will try and help with this problem Hotpoint WMA10P washing machine
If you have replaced the bearings and the spider then I suspect you may have damage to the drum bearing casing I have found a complete half drum for you with bearings spider seal the lot. also exploded diagram below and videos to help you
-
How to replace a washing machine door seal on Hotpoint, Indesit, Ariston & Scholtes
-
How to change bearings on a washing machine 1 of 4
-
How to change bearings on a washing machine 2 of 4
-
How to change bearings on a washing machine 3 of 4 this includes how to fit the shaft or spider.
-
How to change bearings on a washing machine 4 of 4. The reassembly of the machine.
Hotpoint WMA10P washing machine full list of spare parts for this model below
https://svcs.ebay.com/services/search/FindingService/v1?OPERATION-NAME=findItemsAdvanced&SERVICE-VERSION=1.0.0&SECURITY-APPNAME=Ferdinan-h2rliste-PRD-95d705b3d-1d9306c9&RESPONSE-DATA-FORMAT=JSON&GLOBAL-ID=EBAY-GB&affiliate.trackingId=5338688226&affiliate.networkId=9&REST-PAYLOAD=true&paginationInput.pageNumber=1&paginationInput.entriesPerPage=12&keywords=Hotpoint+WMA10P&descriptionSearch=true