Kenwood Ck404 Oven element not held with screws, how do I remove it to replace
I will try and help with this problem on Kenwood Ck404 Oven
There were two different types of wattage ​elements​ fitted to this at cooker​ 2200 and 2500 watts ​and they are sometimes fixed from the rear of the machine,​ this means that you will need to pull the cooker out and take off the backplate to access the two bolts that will hold the element in place I have put a video below to assist you on the elements for cooker are listed below​ Kenwood Ck404 Oven
If you need any further assistance please feel free to contact me​. all the best Paul​.
 |
 |
Paul Charmbury
Appliances Engineer  Â  Â  Â  |
One Response to “Kenwood Ck404 Oven element not held with screws, how do I remove it to replace”
Thank you. I have a Kenwood CK404. I did exactly what you said and the job was done within 10 minutes. Thank you for your advice really really appreciate it. Sunil