Kenwood Ck404 Oven element not held with screws, how do I remove it to replace
I will try and help with this problem on Kenwood Ck404 Oven
There were two different types of wattage elements fitted to this at cooker 2200 and 2500 watts and they are sometimes fixed from the rear of the machine, this means that you will need to pull the cooker out and take off the backplate to access the two bolts that will hold the element in place I have put a video below to assist you on the elements for cooker are listed below Kenwood Ck404 Oven
If you need any further assistance please feel free to contact me. all the best Paul.
 |
Paul Charmbury
Appliances Engineer     |
One Response to “Kenwood Ck404 Oven element not held with screws, how do I remove it to replace”
Thank you. I have a Kenwood CK404. I did exactly what you said and the job was done within 10 minutes. Thank you for your advice really really appreciate it. Sunil