Refine your search
You can refine your search further by entering make and model number if you are looking for parts. If you are looking for tutorials please use appliance type only. If you need help please use FAQs or ask a question in contact us page (make sure you have full model number)
Having trouble with layered Navigation? Watch Video
Our How-to-repair stores
How to replace a belt on a condenser tumble dryer Zanussi, Electrolux & Aeg
The first thing you will notice if your tumble dryer belt has snapped, is the dryer is making a motor noise but the drum is not turning or the dryer is not drying. If the drum in your dryer is no longer rotating the chances are that your drum-belt may have snapped, you end up
Zanussi ZDC46130W Condenser Tumble Dryer stops mid-cycle
Hi Paul.
Our Zanussi Condenser Dryer has started to stop mid-cycle. It runs for about 5 only then stops.
I have faithfully cleaned out the fluff filters in the door and body as well as the condenser itself so I don’t think the lies there. I have also cleaned out the front “hollow” space in the body running from the filter downward to the base of the front where the condenser is located, as best as I could. I found there was water in the space at the bottom of that area which I hope is normal – given it’s a condenser.
I replaced the capacitor in January this year when the drum would only rotate when it was given some assistance by manually rotating prior to shutting the door and then starting.
I am at a loss. Could you please assist?
I would appreciate it very much…and it would make me a hero once again) to “er indoors”.
Much obliged.
Trevor
Zanussi ZDC47209W auto sense belt
Hi Paul the clip your after i cant find on the data base but if you look for any engineering shop or good hardware place they will have it as its a standard size (take the old one with you as or use a micrometer to measure shaft). the belt for your Zanussi ZDC47209W is below just