Refine your search
You can refine your search further by entering make and model number if you are looking for parts. If you are looking for tutorials please use appliance type only. If you need help please use FAQs or ask a question in contact us page (make sure you have full model number)
Having trouble with layered Navigation? Watch Video
We're busy building a brand new shop! In the meantime, find what you need at our partner website.
Our How-to-repair stores
-
Tumble Dryer Temperature Sensor NTC Probe : K276 3792171203 1242940102
Category: Recycle Appliances
£8.30 -
Washing Machine Soap Detergent Drawer 1246103624
Category: Recycle Appliances
£23.65 -
Washing Machine Drain Pump : Askoll 1326630009
Category: Recycle Appliances
£7.50 -
Washing Machine Door Lock Rold Da Series DA056511
Category: Recycle Appliances
£15.65 -
Genuine Washing Machine Drive Belt 6PJE 1184
Category: Recycle Appliances
£11.80 -
Genuine Washing Machine Drum Shock Absorber x2
Category: Recycle Appliances
£18.80 -
Genuine Washing Machine Electrolux Interference suppressor 10A 3792740007
Category: Recycle Appliances
£8.50 -
GENUINE WASHING MACHINE CONNECTION RING/RUBBER BELLOW
Category: Recycle Appliances
£3.95 -
Genuine Washing Machine Soap Draw Detergent Dispenser
Category: Recycle Appliances
£24.45 -
Genuine Washing Machine Drain Pump Askoll
Category: Recycle Appliances
£9.50 -
Washing Machine Pressure Switch 1328195019
Category: Recycle Appliances
£11.65
Zanussi ZKN7147 washing machine Trips RCD and doesn’t complete program
Paul your assistance please. Problem with Zanussi washing machine ZKN7147J
On a 40 degree wash, when start button pressed machine trips RCD. When RCD reset machine starts ok and works through program wash rinse cycles until with 22 minutes remaining RCD trips again. When RCD is reset machine continues with wash & rinse cycles. However with one minute remaining door lock LED goes from steady on to flashing, and door can be opened, wash rinse cycles appear to be finished. But timer doesn’t reach zero and buzzer doesn’t sound. This is repeatable fault.
On 30 degree wash when start button is pressed machine starts ok and works through wash rinse cycles ok. Again with 22 minutes remaining RCD trips. When RCD is reset machine continues with wash & rinse cycles. However with one minute remaining door lock LED goes from steady on to flashing, and door can be opened, wash rinse cycles appear to be finished. But timer doesn’t reach zero and buzzer doesn’t sound. This too is repeatable fault.
I have inspected both PCBs, no evidence of blown electrolytic cap or overheating components. Main PCB pt no.EWM2500N.
I have replaced interlock, on the thinking that it was preventing the timer not reaching zero. Haven’t tried any other programs.
Washing machine is kept in a garage.
(Prod 91460443901. Type H1966334. Ser No. 438 00016).
Comments appreciated. Many thanks. Regards Howard