Indesit Condenser Tumble Dryer IDCE8450BHUK H20 , the machine stops after 3 mins,I have cleaned the filters etc, no water in the reservoir,
I think I need a water pump, float,assembly.
Mandy Beard
I will try and help with your Indesit Condenser Tumble Dryer IDCE8450BHUK problem.
The first thing you need to check, in the exploded diagram below you have part number 600 this is the reservoir that the pump transfers the water from to the collection tray at the top, if this has got water in it and the machine is cutting out then there is a good chance that the pump all the float might not be working correctly, the next thing you need to test is the heating element, make sure that both thermostats on the top of the heater are working correctly there are some videos below to assist you in all your repairs.
You can always test the pump system by taking the lid off and pulling out the reservoir draw and then pouring a cup full of water into the area this then we'll backflow into the pump Reservoir part number 600 should activate the float which will then activates the pump and then bring the water back up to the reservoir at the top this way you can physically see that the pump is working
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page
Common Indesit Condenser Tumble Dryer IDCE8450BHUK faults with links to the right repair guide
I have included a lot of videos in the links below on these tumble dryers to assist you in repairing your tumble dryer; I have also included an exploded diagram of your machine with all the parts that you need listed below that just click on the relevant and it will take you to a search result
- No heat
This is the most common fault on tumble dryers.
Vented dryers: this can be a fault with the thermostats, heater, or on some occasions, it might be the timer or the relay on the printed circuit board.
Condensor dryers: this might be any of the above but you also have a condenser plate that collects the water and then is either pumped to the collection tray or flows into a tank. Check pump unit and float switches.
Heat pump dryers: these are much more complicated they use a refrigeration prosses to heat the cloths and use the cooling side to condense the water for collection. Check compressor is running, check NTC sensors and check filters, and also that it has the right amount of refrigeration gas (normally only done by an engineer)
- Drum not turning
This will stop the dryer from drying. You may have to replace a faulty belt or in other cases, look at the motor, motor capacitor, or the jockey wheels. Again there are relays on printed circuit board types that can go faulty.
- Not starting
Whilst, not a common problem, you may have a faulty door switch, starter relay if fitted, or can be start button or PCB.
- Noisy Machine
This is usually caused by faulty bearings, jockey wheels or worn felt pads. The motor can get dust build up in the bearings, also the fan blades can distort in shape and make noise rubbing the housing.
- Water leaks.
This can be a simple as the water tank (in a condenser tumble dryer) has not been emptied, or not placed back into the housing correctly. The condenser plate can need cleaning. The pump unit might not be working. Or the ducting system can be clogged with fluff etc. See servicing tumble dryer.
- Tumble dryer reports a fault code or error code.
Error codes can be on the display or given in certain lights flashing sequences. Tumble dryer fault codes are not universal but may only point you or an engineer in the right direction they are not 100% accurate they are only that for guidance. Your owner’s manual may help you identify the problem and even suggest a fix. In other cases, you’ll need an engineer to trace the fault. Don’t be tempted to ignore a fault code, even if the dryer seems to be functioning normally. Some codes are ‘early warning signs’ and fixing the machine at an early stage could save you time and money in the long run.Contact us with the full model number and detailed description
-
Hotpoint Indesit Tumble dryer not heating Replacing element
-
Tumble dryer noisy Hotpoint
-
How to replace tumble dryer belt on Hotpoint, Indesit, Ariston, Creda & Proline
-
Hotpoint Creda tumble dryer how to fit front felt bearing. Part 1
-
Error fault codes for Ariston, Hotpoint Indesit, Scholtes washing machines
-
Condenser Tumble Dryer how to replace the pump unit.
-
How to service a Condenser Tumble Dryer pump unit.
-
How to replace a Tumble Dryer fixed drum Riveted Drum shaft
Match your part for Indesit Condenser Tumble Dryer IDCE8450BHUK and use reference number in list below and click on the link to your part
Reference | Part Number | Description |
---|---|---|
101 | C00300334 | DASHBOARD HANDLE I DCE8450B |
101 | C00550492 | DASHBOARD GW IDCE845 0B |
103 | C00271172 | PROGRAMME KNOB |
103 | C00508251 | WASH TIMER KNOB WHIT E GW INDESIT ECOT |
125 | C00114683 | WORKTOP |
125 | C00512830 | WORKTOP WHITE GLOBAL |
152 | C00306484 | ON-OFF BUTTON WHITE |
152 | C00508250 | PUSHBUTTON WHITE GW ON/OFF INDESIT ECOTI |
153 | C00272032 | LIGHT GUIDE |
156 | C00306486 | BUTTON OPTION WHITE |
156 | C00508382 | OPTION BUTTON (5) GW INDESIT ECOTIME |
157 | C00298329 | ELECTRONIC CARD (TD) STAND - BY |
160 | C00271184 | BUTTON DELAY/TIMED |
166 | C00300345 | DRAWER HANDLE IDCE84 50B |
166 | C00550491 | DRAWER HANDLE GW IDC E8450B |
301 | C00114678 | DOOR ASSY WHITE (NO LOGO) |
301 | C00271054 | TD DOOR ASSY. WHITE INDESIT LOGO |
301 | C00271304 | ADHESIVE LOGO INDESI T |
301 | C00512973 | DOOR SIT GLOB WHI (NO LOG |
303 | C00095514 | DOOR LATCH EMZ (TD) |
304 | C00119843 | D/LATCH BLANK MFLEX |
305 | C00274790 | HINGE BLOCK |
306 | C00113847 | Tumble Dryer Door Probe - Plastic |
307 | C00113848 | Tumble Dryer Fluff And Lint Filter |
310 | C00115798 | Tumble Dryer Plinth Catch |
310 | C00141599 | Tumble Dryer Plinth |
310 | C00512831 | PLINTH GLOBAL WHITE |
311 | C00254950 | FRONT PANEL WHITE |
311 | C00510921 | FRONT PANEL WHITE (G LOBAL) |
312 | C00095523 | DOOR CATCH EMZ SIROC |
315 | C00114680 | DOOR HINGE UPPER |
315 | C00266178 | SCREW |
316 | C00114681 | DOOR HINGE LOWER |
317 | C00119847 | D/CATCH BLANK MFLEX |
318 | C00286300 | Tumble Dryer Door Seal |
323 | C00113854 | MICRO SWITCH & LEVER |
330 | C00141612 | SENSOR STRIP |
330 | C00286630 | AIR DUCT WHITE B ENE |
335 | C00291937 | THERMISTOR FRONT ARC ADIA TD |
337 | C00258575 | DRUM FRONT SEAL (AXIAL) |
340 | C00113856 | SIDE PANEL WHITE |
340 | C00510922 | SIDE PANEL FMD GLOBA L WHITE |
347 | C00113858 | Tumble Dryer Plinth Cover Latch |
349 | C00295492 | SEAL BLACK FOAM (AIR DUCT TO BASE) |
350 | C00255284 | Tumble Dryer Door Bearing Pad |
501 | C00287059 | DRUM (PATTERN) GALV CONDENSER |
502 | C00113860 | SEAL BASE REAR PANEL |
502 | C00378867 | REAR PANEL KIT CONDE NSER CLASSIC |
503 | C00142628 | Tumble Dryer Rear Drum Bearing |
503 | C00250889 | SCREW M4X10 |
504 | C00142631 | DRUM SHAFT COLLAR |
505 | C00095551 | Tumble Dryer Drive Pin |
507 | C00289203 | Tumble Dryer Bearing Cover |
508 | C00380932 | MAINS CABLE AND PLUG 1.8M BLACK |
509 | C00095556 | CABLE CLAMP/GROMMET |
509 | C00250833 | NO7 HILO POZI SCREW |
510 | C00378867 | REAR PANEL KIT CONDE NSER CLASSIC |
511 | C00280898 | HEATER COVER + INSUL ATING PAD+WICK |
515 | C00113865 | Tumble Dryer Pump To Container Pipe |
515 | C00114676 | PIPE SUPPORT |
516 | C00113866 | Tumble Dryer Drain Pipe |
521 | C00116598 | Tumble Dryer Thermostat Kit |
522 | C00294624 | HEATER ARCADIA 2.3KW ( |
526 | C00208347 | CLAMP |
527 | C00272335 | Tumble Dryer Cooling Fan |
541 | C00305794 | DRUM SHAFT KIT (RIVE TED DRUM PLATE) |
544 | C00301275 | SUPPRESSOR DRYER NP |
545 | C00250835 | SCREW 5 X 23 |
545 | C00286905 | Tumble Dryer Small Drum Lifter |
546 | C00286905 | Tumble Dryer Small Drum Lifter |
547 | C00287188 | Tumble Dryer Water Container Support |
548 | C00193521 | Tumble Dryer Water Container |
549 | C00113897 | Tumble Dryer Water Container Inlet |
550 | C00303312 | MODULE ARCADIA DRYER (IRON ZONE) |
550 | C00310470 | MODULE ARCADIA DRYER (NORMATIVE UPGRADE) |
551 | C00300928 | CARD IDCE8450BHUK 8K B 50825230058 |
551 | C00361152 | CARD IDCE8450BHUK 8K B 50825230303 (NORM) |
551 | C00517394 | CARD IDCE8450BHUK 8K B 50825230302 (NORM) |
553 | C00113898 | Tumble Dryer Container Adaptor |
555 | C00255284 | Tumble Dryer Door Bearing Pad |
556 | C00116358 | BELT 6 RIB (TD) (199 1 FITTED) |
557 | C00113902 | SIDE STRUT ANGLED |
558 | C00292949 | THERMISTOR REAR ARC ADIA |
599 | C00199418 | HARNESS DISPLAY/MODU COMMUNICATION HARNES |
599 | C00279523 | CABLE SENSING STRIP |
599 | C00294278 | HARNESS FLOAT SWITC H |
599 | C00294623 | HARNESS NTC/DOOR SW ITCH ARCADIA COND |
599 | C00300876 | HARNESS PUMP-MOTOR- CAP (3 WIRES) |
599 | C00480596 | HARNESS L&N DRYER C ONDENSER |
600 | C00271612 | SCREW 14MM COND BASE |
600 | C00287037 | BASE CONDENSER WHITE |
611 | C00258878 | FLOAT SWITCH N/O |
614 | C00208347 | CLAMP |
614 | C00272335 | Tumble Dryer Cooling Fan |
617 | C00288190 | IMPELLER COVER WHITE |
621 | C00258619 | CAPACITOR 8.5UF (DUC ATI) |
623 | C00113879 | Tumble Dryer Jockey Wheel And Bracket |
623 | C00304405 | JOCKEY WHEEL CIRCLIP |
623 | C00504520 | Tumble Dryer Jockey Wheel And Bracket |
625 | C00270657 | SCREW M5X20 |
625 | C00306348 | MOTOR 392/363 & 8.5 UF CAP) KIT |
626 | C00116358 | BELT 6 RIB (TD) (199 1 FITTED) |
632 | C00378635 | Tumble Dryer Float |
633 | C00259700 | PIN - FLOAT 78MM |
634 | C00193127 | Tumble Dryer Water Pump |
635 | C00288932 | PUMP AND FLOAT COVER WHITE |
636 | C00503634 | SERIAL PORT COVER PS 9 COMPLIANT |
637 | C00258585 | CONDENSER ASSY |
638 | C00113903 | Tumble Dryer Condenser Seal |
638 | C00296206 | CONDENSOR FRONT SEAL (GREY RUBBER) |
651 | C00258597 | BASE COVER B ENERGY |
656 | C00113865 | Tumble Dryer Pump To Container Pipe |
656 | C00113897 | Tumble Dryer Water Container Inlet |
999 | C00296170 | SHOE DRYING RACK |
999 | C00295636 | DRYER ARCADIA SUPPLE MENT |
999 | C00306100 | WIRING DIAGRAM MOTOR 3 WAY CONNECTOR |
999 | C00306101 | WIRING DIAGRAM MOTOR 3 WIRES |
999 | C00386301 | SERVICE MANUAL |