Beko Washing Machine Spare Parts

When looking at the dial on a Beko washing machine treat it as a clock 1 to 12 as in picture.
On some models you may have more programs but for the basic access into the diagnostic mode is the same the same

Start by turning the washing machine of with door shut.

Now turn the dial to the position 1 Which is normally the 90c hold the start /pause button down while you press the on/off button to on for a couple of seconds till light flashes

Now turn the dial to the position 6 and hold down a few seconds the next time you enter it should turn on all the lights now you are in self test diagnostic mode:

Every time you Press the on/off button it will change the test function.

1^st all the lights will show

 2^nd will not do anything

3^rd This will tell the motor to turn at standard wash speed clockwise with pump emptying.

4^th This will tell the motor to turn at standard wash speed anticlockwise with pump emptying.

5^th This will tell the motor to spin clockwise with pump emptying.

6^th This will activate right hand compartment water valve. Please note machine will keep filling until you stop it.

7^th This will activate left hand compartment water valve. Please note machine will keep filling until you stop it.

8^th This will activate booth water valves together. Please note machine will keep filling until you stop it.

9^th will not do anything

10^th this will start fill cycle until water activates the pressure switch at normal fill level (Normally just below the glass on the door) when the Beko washing machine has reached the level it will start clockwise rotation at normal wash action and heat the water. Please note You Have to stop it manually.

11 this will activate the pump only to empty.

Press again and you are back at the start. Turn machine of and leave for a few minutes and the switch back on and you’re in normal wash mode.