NEW REPAIR GUIDES

FORGOT YOUR DETAILS?

AAH, WAIT, I REMEMBER NOW!

Creda Hotpoint oven not heating how to test element & replace

by / Thursday, 23 July 2015 / Published in Cooker & Oven, Fan Oven Elements

This video will show you how to replace a Hotpoint Creda fan oven element: models like SC36, D33, SY36, SY37W, UBS537 etc

 

 

 

This tutorial can be used on Hotpoint Creda ovens or cookers Etc.
It will show you how to diagnose the fault and how to replace a fan oven element.

on models like the SC36EB, SC36EK, SC36EW, SC36EX.

 

Your Hotpoint or Creda fan oven that has stopped heating up is one of the most common problems that oven repair & cooker repair engineers are called to. The problem in most cases is simply a faulty fan oven element. To call out the manufacture (Hotpoint or Creda) to replace an oven element is going to cost you in the region of £75 – £125.

Here are the 3 main faults to look for in your oven or cooker that is not heating

If your Oven is not getting hot or heating up it could be a faulty element, if the fan in the oven is running and the thermostat light is on, this will lead us to believe that the element has gone faulty.

When you turn the oven on the household electrical supply trips on the Rcd (this is the earth trip in the fuse board) your fan oven element has gone to earth and needs replacing.

Your oven will not work until the clock/timer has been re-set after replacing an oven element consult manual.

Note that in some cases the fan oven element fails and it will trip the consumer unit’s rcd (this is the earth trip in the fuse board). If so then it needs to be re-set, but if every time you turn the fan oven on it keeps tripping then this could be a faulty element that has gone to earth.

The following symptoms should be apparent when testing your Hotpoint or Creda oven or cooker:

  • Make sure your timer is not on auto.
  • Check to see if Fan oven is not heating up,
  • Check to see if fan in the oven is working fine,
  • Check to see if thermostat light is on.
  • On removal of the Fan Oven Element (see below) there may be visual signs of burning, blowing, or splitting but not in all cases. Is no sign of damage you will have to test with a meter.

Our video instructions will show you exactly how to replace a Hotpoint or Creda ovens oven element yourself, and save you lots of money!

Pictures on How to replace a fan oven element and different blown oven elements

how to set cread hotpoint cooker oven timer and thermostat

Creda Oven Not Heating

how to Remove creda hotpoint oven door

How to remove fan oven element on creda hotpoint single ovens

creda SC36EB oven how to test element

creda hotpoint how to lock door hinge on main oven

How to replace element in creda sc36 series

creda SC36EB oven not heating

how to set cread hotpoint cooker oven timer and thermostat




9 Responses to “Creda Hotpoint oven not heating how to test element & replace”

  1. Yasmin says : Reply
    January 9, 2017 at 8:00 pm

    I am looking for the part for my fan oven its the element that has gone I have a serial number I have a feeling it no longer exists it is 220 watt oven I need the element heater for this oven .

  2. Naomi says : Reply
    March 13, 2017 at 7:15 pm

    Hi, please can you help..
    2 days ago over only worked below 150degrees, grill and hob fine. Yesterday only grill and hob work, Today only the hobs work. I assume it is a faulty thermostat and not clock/an element for example but is there any way to be sure?

    I am just about to order part to replace as I think my thermostat is the issue. Wonder if you could confirm /advise please.

    I was told that my cooker has two thermostats, not sure if this is accurate though..(AMICA 508EE1 (W) )

    Thank You

  3. joanne says : Reply
    March 20, 2017 at 9:57 am

    creda built In oven not heating
    think element going to check tonight
    can you help source as I cant find them

    MODEL E420ED

  4. Adrian says : Reply
    June 21, 2017 at 2:03 pm

    I’ve an old creda oven the element is heating but fan isn’t spinning, i’ve tried freeing it with a screwdriver but no luck. Any ideas?

  5. Keith Powley says : Reply
    September 10, 2017 at 11:13 am

    Hi, I have a Creda Collection C262E (electric) ovan,
    The problem is that in the top ovan the fan is rattling, like its catching on
    something, any tips on how to fix it please?
    Thank you in advance.

  6. Lesley says : Reply
    April 30, 2021 at 10:45 am

    I have a hot point experience cooker my large oven not heating replaced element this morning still not working any ideas ???

24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.





 
TOP